FREE Washington Permit Test 6 - Real 2025 DMV Test Questions

19. This sign means:

Pedestrians walking along the road ahead.

Pedestrian crossing ahead.

Pedestrians must not cross here.

Be alert for construction workers on the road.

This sign indicates the presence of a pedestrian crossing. Drivers should be cautious when driving where pedestrians may be present.

20. You are approaching a railroad crossing that has no visible gates or flashing lights, but has a standard crossbuck. You should:

Approach all tracks with extreme caution and cross only when you know that there is no train coming.

Turn your radio down to hear if there may be an approaching train.

Only continue once cleared to do so by a flagger, if applicable.

All of the above.

You must approach all railroad crossings with extreme caution and cross only when you know that no train is coming from either direction. If there is a flagger at a crossing, you must obey all of their instructions.

21. What should you do when you are going to enter a roadway from a private road?

Blow your horn to warn cars you are entering the roadway.

Stop with part of your car on the roadway to alert other drivers.

Drive out fast to merge smoothly with the traffic.

Yield the right-of-way to pedestrians and roadway traffic.

When entering a roadway from a driveway or private road, you must yield the right-of-way to pedestrians and traffic on the roadway.

22. Which of the following are used on some highways to direct drivers into the proper lanes for turning?

Flashing red lights

Flashing yellow lights

White lines on the side of the road

White arrows in the middle of the lanes

Arrows may be used to indicate which lanes should be used for specific purposes, such as driving straight or making a turn.

23. You must not drive your vehicle at a speed greater than:

The maximum speed limit.

A speed that is faster than is reasonable and prudent.

A speed that is safe for existing conditions.

All of the above.

You must not drive at a speed that is faster than is reasonable and prudent. You must drive at a speed that is appropriate for the area where you are driving, the type and condition of surrounding traffic, the presence of pedestrians, the weather, the quality of the road, and light conditions. You must drive within legal speed limits.

24. While driving on a two-lane road without bicycle lanes, you encounter a bicyclist traveling in the same direction. What is the safest way to pass the bicyclist?

Slow down and wait until there is no traffic approaching, then pass the bicyclist while leaving him or her sufficient space.

Continue driving straight. It is the bicyclist’s responsibility to get out of your way.

Do not pass the bicyclist until you come to a traffic signal or stop sign.

Honk at the bicyclist to let him or her know you are about to pass.

You should pass a bicyclist the same way you would pass any other vehicle, but not so fast or close to them that you throw debris in their face or blow them around with the draft of air from your vehicle. Allow at least 3 feet of space between your side mirror and the bicyclist, or at least 5 feet on higher speed roads or when there is a group of bicyclists. Honking unnecessarily may startle riders and make them more likely to crash.

Pedestrians only.

Intersection ahead.

Hiking trails ahead.

School crossing ahead.

This sign indicates that a school crossing is ahead.

2025 Washington Permit Test 6

19. This sign means:

20. You are approaching a railroad crossing that has no visible gates or flashing lights, but has a standard crossbuck. You should:

21. What should you do when you are going to enter a roadway from a private road?

22. Which of the following are used on some highways to direct drivers into the proper lanes for turning?

23. You must not drive your vehicle at a speed greater than:

24. While driving on a two-lane road without bicycle lanes, you encounter a bicyclist traveling in the same direction. What is the safest way to pass the bicyclist?

25. This sign means:

See the exact questions that will be on the 2025 Washington DMV exam.

Choose your Type

Choose your State

Choose your Test

2025 Washington Permit Test 6

19. This sign means:

20. You are approaching a railroad crossing that has no visible gates or flashing lights, but has a standard crossbuck. You should:

21. What should you do when you are going to enter a roadway from a private road?

22. Which of the following are used on some highways to direct drivers into the proper lanes for turning?

23. You must not drive your vehicle at a speed greater than:

24. While driving on a two-lane road without bicycle lanes, you encounter a bicyclist traveling in the same direction. What is the safest way to pass the bicyclist?

25. This sign means:

See the exact questions that will be on the 2025 Washington DMV exam.