2024 New Hampshire Motorcycle Permit Test
The following questions are from real DMV written motorcycle permit tests. These are some of the actual permit questions you will face in New Hampshire when getting your motorcycle learners permit. Each motorcycle theory practice test question has three answer choices. Select one answer for each question and select "grade this section." You can find this button at the bottom of the drivers license quiz. For a complete list of questions and answers for New Hampshire please visit https://cheat-sheets.dmv-written-test.com/en/new-hampshire/motorcycle.
1. After entering a turn, you should roll on the throttle and:
Roll on the throttle through a turn to stabilize your suspension. Maintain a steady speed or accelerate gradually through the turn.
2. When riding a motorcycle:
To maintain proper balance, your feet should be placed firmly on the footrests and not dragged on the ground. Do not point your toes downward, as this may cause them to catch on the road. Keep your feet near the controls so you can reach them quickly, if needed.
3. To reduce your reaction time, you should:
When approaching a potentially dangerous area, such as an intersection, you should cover the clutch lever and both brakes in order to reduce the amount of time you will need to react to any hazards.
4. The gearshift lever is operated by:
The gearshift lever of a motorcycle is located in front of the left footrest and is operated by the rider's left foot.
5. When crossing angled railroad tracks, it is usually safest to approach the tracks:
In general, it is safest to simply proceed straight in your lane when crossing angled railroad tracks. Turning to approach tracks at a right angle can be dangerous because it may send you traveling into another lane.
6. One way to tell if your rear tire has gone flat while riding is if:
If your rear tire fails, the back of your motorcycle will likely jerk from side to side. It is rare for motorcyclists to actually hear a tire fail.
Frequently Asked Questions
1. Get a motorcycle learner's permit: You must obtain a motorcycle learner's permit before you can apply for a motorcycle driver's license. To get the permit, you must pass a written test and a vision test at any DMV office. You must also provide proof of identity and residency.
2. Practice riding your motorcycle: While holding the learner's permit, you must practice riding your motorcycle. You may only ride during daylight hours and may not carry passengers.
3. Schedule and pass the road test: After practicing, you can schedule and take the road test. The road test consists of two parts: a skills test and an on-road test. During the skills test, you will demonstrate your ability to control your motorcycle in a controlled environment. During the on-road test, you will demonstrate your ability to operate your motorcycle safely on public roads.
4. Submit required documentation and pay fees: If you successfully pass the road test, you will need to submit required documentation (including proof of identity, residency, and insurance) and pay any applicable fees to receive your motorcycle driver's license.
It is important to note that if you are under 18 years old, you must complete an approved Motorcycle Rider Training Program before applying for a motorcycle driver's license.
1. Proof of identity: You will need to bring a government-issued ID, such as a driver's license or passport, to prove your identity.
2. Proof of residency: You will need to bring a document that shows your current address, such as a utility bill or bank statement.
3. Social Security card: You will need to bring your Social Security card or another document that shows your Social Security number.
4. Parental consent form (if under 18): If you are under 18 years old, you will need to bring a parental consent form signed by your parent or legal guardian.
5. Proof of completion of an approved Motorcycle Rider Training Program (if under 18): If you are under 18 years old, you will also need to bring proof of completion of an approved Motorcycle Rider Training Program.
It's always a good idea to check with the New Hampshire Department of Motor Vehicles (DMV) for a complete list of required documents before heading to the DMV office.
You can study for the written test by reviewing the New Hampshire Motorcycle Operator Manual, which is available on the New Hampshire DMV website. Additionally, there are many online practice tests and study guides available to help you prepare.
Once you pass the written test, you will be issued a motorcycle permit, which allows you to practice riding on public roads under certain restrictions. You will need to hold the permit for at least 45 days before taking the road test and obtaining your full motorcycle driver's license.
1. Motorcycle operation: This includes topics such as starting and stopping, shifting gears, braking, and turning.
2. Traffic laws: This includes knowledge of traffic signs, signals, and rules of the road.
3. Riding techniques: This includes safe riding practices such as maintaining a safe following distance, scanning for hazards, and using proper lane positioning.
4. Alcohol and drug use: This includes knowledge of the dangers of operating a motorcycle while under the influence of alcohol or drugs.
5. Protective gear: This includes knowledge of the importance of wearing proper protective gear such as helmets, gloves, and boots.
6. Passengers and cargo: This includes knowledge of how to safely carry passengers or cargo on a motorcycle.
7. Emergencies: This includes knowledge of how to react in emergency situations such as tire blowouts or sudden stops.
It is important to study all of these topics thoroughly before taking the written test to ensure that you are prepared and can pass the test on your first attempt.
To qualify for the waiver, you must successfully complete the course and obtain a completion certificate. You will then need to bring the certificate to the DMV when you apply for your motorcycle license. The DMV will then waive the written and road tests, and you will be issued a motorcycle license.
Taking a motorcycle training course is highly recommended even if you are not looking to waive the tests. These courses can provide valuable instruction on safe riding practices and help you become a better rider overall. Additionally, many insurance companies offer discounts to riders who have completed an approved training course.
1. Choose a course: There are several approved motorcycle rider training courses offered throughout the state. You can find a list of approved courses on the New Hampshire DMV website.
2. Register for the course: Once you have chosen a course, you will need to register and pay the course fee. The cost of the course can vary depending on the provider and location.
3. Attend the classroom sessions: The course will typically consist of both classroom and on-cycle training. The classroom sessions will cover topics such as motorcycle safety, laws, and riding techniques.
4. Attend the on-cycle training: The on-cycle training portion of the course will take place at a designated location, where you will practice riding skills under the guidance of a certified instructor.
5. Obtain a completion certificate: Upon successfully completing the course, you will receive a completion certificate. This certificate can be used to waive the written and road tests required to obtain a motorcycle license in New Hampshire.
6. Apply for your motorcycle license: You can apply for your motorcycle license at any DMV office in New Hampshire. You will need to bring your completion certificate, proof of identity and residency, and payment for any applicable fees.
It is important to note that while completing a motorcycle rider training course can waive the written and road tests required to obtain a motorcycle license in New Hampshire, you will still need to pass a vision test and meet all other licensing requirements.
If you do not own a motorcycle, you may be able to borrow one from a friend or family member who is willing to lend it to you for the test. However, it is important to note that you will be responsible for any damages that occur to the motorcycle during the test.
Alternatively, you may consider taking a motorcycle rider training course, which can provide access to motorcycles for use during the course and for the test. Additionally, completing an approved training course can waive the written and road tests required to obtain a motorcycle license in New Hampshire.
It is important to note that you will be responsible for any damages that occur to the motorcycle during the test. You may want to consider purchasing a rider training course that provides access to motorcycles for use during the course and for the test. Completing an approved training course can waive the written and road tests required to obtain a motorcycle license in New Hampshire.
1. Starting and stopping the motorcycle smoothly
2. Making left and right turns
3. Shifting gears smoothly (if applicable)
4. Braking smoothly and safely
5. Maintaining a safe following distance from other vehicles
6. Using proper lane position and signaling when changing lanes
7. Driving at a safe speed appropriate for road and traffic conditions
8. Performing a quick stop in a designated area (also known as an emergency stop)
9. Swerving to avoid an obstacle in a designated area
You will also be evaluated on your ability to demonstrate proper use of the motorcycle's controls, including the throttle, brakes, clutch (if applicable), turn signals, and horn.
It is important to practice these skills before taking the driving test to ensure that you are confident and comfortable on your motorcycle, which will help you perform better during the test.
Here are the restrictions and limitations for new motorcycle drivers in New Hampshire:
1. Learner's Permit: You must be at least 16 years old to apply for a motorcycle learner's permit in New Hampshire. With a learner's permit, you can only ride during daylight hours and cannot carry passengers.
2. Motorcycle License: To obtain a full motorcycle license in New Hampshire, you must be at least 16 ½ years old and have held a learner's permit for at least 45 days or have completed an approved rider training course. Once you have a motorcycle license, you can ride during any hours and carry passengers.
3. Helmet Law: All motorcycle riders and passengers in New Hampshire must wear a helmet that meets state safety standards until they are 18 years old.
4. Alcohol Restrictions: It is illegal for any driver, including motorcycle riders, to operate a vehicle with a blood alcohol concentration (BAC) of 0.08% or higher.
5. Insurance Requirements: All registered motorcycles in New Hampshire are required to have liability insurance coverage.
It is important to follow these restrictions and limitations as failure to do so may result in fines, license suspension, or even criminal charges.
In some cases, other states may have different age restrictions or helmet laws for motorcycle riders. Additionally, some states may require riders to have additional certifications or endorsements beyond what is required in New Hampshire.
It is always a good idea to do your research and make sure you are following all local laws and regulations when riding your motorcycle in another state. This will help ensure your safety as well as prevent any legal issues that may arise from violating local laws.
However, it is important to note that wearing a helmet while riding a motorcycle is highly recommended for safety reasons. Helmets can protect riders from head injuries in the event of an accident. In fact, according to the National Highway Traffic Safety Administration, wearing a helmet can reduce the risk of head injury by 69% and the risk of death by 37%.
Even if you are not required by law to wear a helmet, it is always a good idea to do so for your own safety.
- Class M: This is the basic motorcycle license that allows you to operate any two-wheeled motorcycle, motor-driven cycle, or three-wheeled motorcycle.
- Class M with a motorcycle endorsement: This license allows you to operate any two-wheeled motorcycle, motor-driven cycle, or three-wheeled motorcycle with an engine displacement of 300cc or greater.
- Class M with a limited motorcycle endorsement: This license allows you to operate any two-wheeled motorcycle, motor-driven cycle, or three-wheeled motorcycle with an engine displacement of less than 300cc.
To obtain a Class M or Class M with a motorcycle endorsement, you must pass a written knowledge test and an on-road skills test. To obtain a Class M with a limited motorcycle endorsement, you only need to pass the written knowledge test.
It is important to note that if you are under 18 years old, there are additional requirements for obtaining a motorcycle license in New Hampshire. You must complete a Motorcycle Rider Training Program approved by the New Hampshire Department of Safety and have held a valid New Hampshire driver's license for at least 6 months.
- Motorcycle sidecar/trike endorsement: This endorsement allows you to operate a three-wheeled motorcycle or a motorcycle with a sidecar.
- Motorcycle passenger endorsement: This endorsement allows you to carry a passenger on your motorcycle.
- Motorcycle cargo endorsement: This endorsement allows you to transport goods or materials on your motorcycle.
To obtain any of these endorsements, you must already hold a valid Class M or Class M with a motorcycle endorsement. You will need to pass additional knowledge and/or skills tests, depending on the type of endorsement you are seeking.
It is important to note that some types of motorcycles may require additional endorsements or special licenses beyond what is required for a standard motorcycle license. For example, if you plan to operate a commercial or large-displacement motorcycle, you may need a commercial driver's license (CDL) or a special certification.
If you need a language other than English, Spanish, or French, you may bring an interpreter with you to translate the questions and answers. The interpreter must be at least 18 years old and cannot be a family member or anyone else with a vested interest in the outcome of your test. You will need to notify the Division of Motor Vehicles (DMV) ahead of time if you plan to bring an interpreter to your test.
It is important to note that the on-road skills test is not available in languages other than English. If you need an interpreter for the on-road skills test, you will need to provide your own interpreter who is able to communicate effectively in English and your native language.
1. Review the DMV motorcycle driver's manual: The manual contains all the information you need to know for the written knowledge test, including traffic laws, road signs, and safe driving practices. Make sure you read and understand all the information in the manual.
2. Take practice tests: The DMV offers practice tests online that can help you assess your knowledge and identify areas where you need to improve. Practice tests can also help you get familiar with the format of the test.
3. Practice riding a motorcycle: If possible, practice riding a motorcycle before taking the test. This will help you develop your riding skills and build confidence.
4. Get proper gear: Make sure you have proper gear to wear during the on-road skills test, including a helmet, eye protection, gloves, long pants, and sturdy footwear.
5. Study road signs: Make sure you know what all road signs mean as they could appear on the written knowledge test.
6. Understand safe driving practices: Ensure that you understand safety procedures like following at safe distance, using turn signals and mirror checks.
7. Arrive early and be prepared: On the day of your test, arrive early and make sure you have all necessary documents. This includes your current driver's license or a photo ID card, proof of insurance and registration certificate for the motorcycle being used during testing.
By following these tips, you can prepare effectively for your motorcycle driver's license test in New Hampshire and increase your chances of success.
It is important to note that if you take the test in a language other than English, Spanish or French, the DMV may have to send your test results to a translator before they can issue your license. This may cause a delay in the processing of your license.
It is important to note that if you fail the written test more than twice, you will be required to complete a motorcycle rider education program before taking the test again. The rider education program is designed to teach you the knowledge and skills needed to operate a motorcycle safely.
If you pass the written test, you will need to complete an on-road skills test before obtaining your motorcycle driver's license. The on-road skills test evaluates your ability to safely operate a motorcycle on public roads and highways.
It is important to take the time to study and prepare for the written test to increase your chances of passing on your first attempt.