Maine Motorcycle Permit Test

When approaching a blind intersection that is controlled by a stop line or stop sign, you must first stop where indicated. You may then edge forward and stop again just short of where the cross traffic lane meets your lane. From that position, lean your body forward and look around buildings, parked cars, or bushes to see if anything is approaching. Make sure your front wheel stays out of the crossroad while you are looking.

When riding, you should sit far enough forward that your arms will be slightly bent when holding the handle grips. This will permit you to easily and comfortably reach and operate the controls.

A plastic, shatter-resistant face shield will protect your entire face in the event of a crash. Googles will protect your eyes, but not the rest of your face. Glasses or a windshield are not an adequate substitute for either goggles or a face shield.

When passing another vehicle on the left, you should ride in the left portion of your lane. Signal your intentions and check for traffic. Pass when it is safe to do so, then signal and return to your original lane when traffic allows.

You can reduce your risk of injury when riding a motorcycle by wearing an approved helmet, face or eye protection, and protective clothing.

Motorcycle brake lights are more difficult to see than the brake lights of larger vehicles, so flashing your brake light may help other drivers to notice it. You should flash you brake light before slowing down where other drivers may not expect you to slow down, such as in the middle of a block or when approaching an alley.

Your lane position affects a number of factors that are important to your safety on the road. Among other things, your position should help you increase your ability to see and be seen, avoid other drivers' blind spots, and set you up for any turns you plan to make.