This endorsement is required to haul any liquid or gaseous materials in a tank or tanks having a capacity of 1,000 gallons or more that is either permanently or temporarily attached to the vehicle or chassis. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. Each question has four possible answer choices. To pass, the applicant must answer at least 16 questions correctly. Test questions come from the Kansas Commercial Driver License Manual. Questions come from chapters covering: Cargo, Passengers and Tank Vehicles. The Tank endorsement can be used with the Class A, B or C CDL.
1. If unsure if a road is becoming icy, a driver can:
If you think the road surface may be becoming icy, you can check for ice on your vehicle by opening the window and feeling the front of the side mirror, mirror support, or antenna. If ice has formed on any of these items, the road is likely becoming icy as well.
2. You can lower the risk of jackknifing by:
You can prevent skidding by steering, accelerating, and braking smoothly. If your drive wheels or trailer wheels begin to skid while you are driving a tank vehicle, the vehicle could jackknife.
3. If a vehicle is equipped with power steering, the hoses should be checked:
When inspecting a vehicle with power steering, you should inspect the hoses, pumps, and fluid levels. Specifically check the hoses for leaks.
4. Driving too fast:
Driving at excessive speeds is a major cause of fatal crashes. Never drive above the posted maximum speed limit and adjust your speed to fit conditions.
5. If a trailer is too high:
Before coupling together a tractor and a trailer, you should make sure the trailer is at the proper height. If the trailer is too low, the trailer nose may be damaged. If the trailer is too high, it may not be able to couple correctly.
6. What does an Anti-Lock Braking System (ABS) do?
The purpose of an Anti-Lock Braking System (ABS) is to prevent a vehicle's wheels from locking up when the driver brakes hard on a slippery surface.
7. If a tire rim is damaged, it should be:
Wheels or rims with welding repairs are not safe.
Frequently Asked Questions
1. Obtain a Kansas Commercial Driver's License (CDL): You must have a valid Kansas CDL before you can apply for a Tank endorsement.
2. Meet the Eligibility Requirements: You must be at least 21 years old, pass a vision test, and have no medical conditions that could interfere with your ability to operate a commercial vehicle.
3. Study the Tanker Endorsement Study Guide: The Tanker Endorsement Study Guide covers the knowledge and skills required to safely operate a tanker truck. You can find the guide on the official Kansas Department of Revenue website.
4. Schedule and Pass the Tanker Endorsement Knowledge Test: You will need to pass the Tanker Endorsement Knowledge Test at a Kansas Department of Revenue driver licensing office. The test consists of 20 multiple-choice questions, and you must score at least 80% to pass.
5. Schedule and Pass the Tanker Endorsement Skills Test: After passing the knowledge test, you will need to schedule and pass the Tanker Endorsement Skills Test. This test involves demonstrating your ability to safely operate a tanker truck in various scenarios.
6. Pay the Required Fees: There is a fee for adding a Tank endorsement to your CDL, which you can pay at the driver licensing office.
7. Receive Your CDL with Tank Endorsement: If you pass both tests and pay all required fees, you will receive your Kansas CDL with a Tank endorsement.
1. Be at least 21 years old: You must be at least 21 years old to operate a commercial vehicle across state lines or transport hazardous materials.
2. Have a valid Kansas CDL: You must have a valid Kansas Commercial Driver's License (CDL) before you can apply for a Tank endorsement.
3. Pass a vision test: You must pass a vision test to ensure that you have adequate vision to operate a commercial vehicle safely.
4. Meet the medical requirements: You must meet the medical requirements for commercial drivers, including passing a medical examination conducted by a certified medical examiner.
5. Pass the Tanker Endorsement Knowledge Test: You will need to pass the Tanker Endorsement Knowledge Test, which covers the knowledge required to safely operate a tanker truck.
6. Pass the Tanker Endorsement Skills Test: You will need to pass the Tanker Endorsement Skills Test, which evaluates your ability to safely operate a tanker truck in various scenarios.
7. Pay the required fees: There is a fee for adding a Tank endorsement to your CDL, which you can pay at the driver licensing office.
Note that additional requirements may apply if you are transporting hazardous materials or operating across state lines. It's important to consult with your local Kansas Department of Revenue driver licensing office or visit their website for more information on CDL requirements and regulations in Kansas.
The Kansas Department of Revenue recommends that individuals seeking a Tank endorsement complete a training program to learn the skills and knowledge necessary to operate a tanker truck safely. This training may be provided by a professional driving school or by an employer.
Additionally, some employers may require specific training or experience before hiring drivers with a Tank endorsement, such as completing a company-specific training program or having a certain amount of driving experience.
It's important to note that if you plan to transport hazardous materials, you may be required to complete additional training and obtain a Hazardous Materials (HazMat) endorsement in addition to the Tank endorsement.
The Tanker Endorsement Knowledge Test will cover topics such as:
- Vehicle inspection and maintenance
- Loading and unloading procedures
- Safe driving practices
- Hazardous materials regulations
- Special braking and driving techniques for tank vehicles
In addition to the written test, you will also need to pass a Tanker Endorsement Skills Test, which evaluates your ability to safely operate a tanker truck in various scenarios. This test will include a pre-trip inspection, basic control skills test, and an on-road driving test.
It's important to study and prepare for the Tanker Endorsement Knowledge Test before taking it. The Kansas Department of Revenue provides the Kansas Commercial Driver's License Handbook, which includes information on the Tanker endorsement, as well as practice tests to help you prepare.
1. Vehicle Inspection and Maintenance: This section of the test will cover the importance of regular maintenance and inspections for tanker vehicles. You'll need to know how to check for leaks, make sure valves are working properly, and look for other potential hazards.
2. Loading and Unloading Procedures: You'll need to know how to safely load and unload liquids, gases, and other materials. This includes knowing how to properly secure cargo and prevent spills.
3. Safe Driving Practices: The test will cover safe driving practices that are specific to operating a tanker vehicle, such as maintaining a safe speed, using proper braking techniques, and avoiding sudden stops or turns.
4. Hazardous Materials Regulations: Tanker drivers often transport hazardous materials, so it's important to understand the regulations related to transporting these materials. The test will cover topics like labeling requirements, placarding requirements, and emergency response procedures.
5. Special Braking and Driving Techniques for Tank Vehicles: Tanker vehicles require special driving techniques due to their high center of gravity. You'll need to understand how to brake safely on hills, make turns without tipping over, and operate in other challenging conditions.
It's important to study and prepare for the Tank endorsement written test using resources like the Kansas Commercial Driver's License Handbook and practice tests.
1. Pre-trip Inspection: You'll need to complete a pre-trip inspection of your tanker vehicle, which includes checking for leaks, ensuring valves are working properly, and making sure cargo is properly secured.
2. Basic Control Skills Test: This part of the test evaluates your ability to control the tanker vehicle in a variety of situations. You'll need to demonstrate skills like backing up, turning around in a tight space, and maneuvering through cones.
3. On-Road Driving Test: The final part of the test is an on-road driving test that evaluates your ability to operate the tanker vehicle safely on public roads. You'll need to demonstrate good driving habits like maintaining a safe speed, using proper braking techniques, and making safe turns.
During all parts of the test, safety is paramount. You'll need to demonstrate that you can operate the tanker vehicle safely and effectively while following all applicable rules and regulations.
It's important to practice these skills before taking the Tank endorsement test. Your CDL training program should include hands-on training in operating tanker vehicles and practicing these types of maneuvers.
1. Endorsement Required: To operate a tanker vehicle, you must have a CDL Tank endorsement on your commercial driver's license.
2. Tanker Vehicle Type: The CDL Tank endorsement is specific to liquid and gas tanker vehicles, so you may not be qualified to operate other types of commercial vehicles.
3. Cargo Type: The CDL Tank endorsement is also specific to certain types of cargo. If you're transporting hazardous materials, for example, you may need additional endorsements or certifications.
4. Capacity Limitations: Depending on your state and the type of tanker vehicle you're operating, there may be capacity limitations in place for how much liquid or gas you can transport.
5. Endorsement Renewal: The CDL Tank endorsement may need to be renewed periodically, depending on your state's requirements.
It's important to understand the specific restrictions and limitations that apply to your CDL Tank endorsement and comply with all regulations to ensure safe operation of your commercial vehicle.
The Tank endorsement is in addition to the basic Class A or Class B commercial driver's license (CDL) requirements. It requires that you pass a knowledge test and a skills test that are specific to operating tanker vehicles.
If you're caught operating a tanker vehicle without the required Tank endorsement, you could face serious penalties, including fines and even the suspension or revocation of your CDL. Additionally, transporting hazardous materials without the proper training and certification can pose a significant risk to public safety.
It's important to obtain the proper endorsements and certifications before operating any commercial vehicle, especially one that carries hazardous materials.
You can apply for the Tanker Vehicles endorsement at your local Department of Motor Vehicles (DMV) office or commercial driver's license office. You'll need to bring your current CDL license, proof of identity, and payment for any fees required by your state.
Once you've passed both tests, the Tanker Vehicles endorsement will be added to your existing CDL license, and you'll be authorized to operate tanker vehicles.
It's worth noting that some states may require additional endorsements or certifications for transporting hazardous materials or other types of cargo in tanker vehicles. Be sure to check with your state's DMV or commercial driver's license office for specific requirements in your area.
Remember, it's important to obtain the proper endorsements and certifications before operating any commercial vehicle, especially one that carries hazardous materials.
First, you are required to have a Hazardous Materials (HazMat) endorsement in addition to the Tank endorsement if you are transporting hazardous materials. To obtain the HazMat endorsement, you must pass a background check conducted by the Transportation Security Administration (TSA).
Second, you must comply with all federal, state, and local regulations for transporting hazardous materials. This includes following specific rules for labeling, packaging, and securing the materials, as well as complying with restrictions on routes and transportation modes.
Third, you must be trained in the safe handling of hazardous materials. The training must cover topics such as identifying hazardous materials, responding to emergencies and spills, and complying with regulations.
Finally, you must have the proper equipment and safety gear to transport hazardous materials safely. This includes having appropriate containers and packaging for the materials, as well as personal protective equipment (PPE) such as gloves and goggles.
It's important to note that the regulations for transporting hazardous materials can be complex and vary depending on the type of material being transported. Be sure to consult the Federal Motor Carrier Safety Administration (FMCSA) Hazardous Materials Regulations (HMR) or your state's regulations for specific requirements in your area.