Arizona Motorcycle Permit Test

While a staggered formation is usually best under normal riding conditions, a group of riders should switch to a single-file formation when taking curves, turning, or entering or exiting a highway.

Before each ride, you should check the air pressure, tread, and general wear of your tires.

For maximum straight-line braking, you should apply the brakes smoothly and firmly. As more weight transfers forward, more will be more traction available at the front wheel, allowing you to apply the front brake with progressively increasing force while reducing the pressure being used on the rear brake. Keep your knees against the gas tank and your eyes up to help keep yourself moving in a straight line.

Reflective material on a vest or on the sides of your helmet can make you more visible to other drivers and should be used both day and night.

The minimum number of drinks left in a person's system can be estimated by subtracting the number of hours since the last drink from the total number of drinks consumed. In this case, the alcohol content of about four drinks would remain.

Before shifting into a lower gear, make sure you are riding slowly enough to shift safely. Downshifting while going too fast may cause the motorcycle to lurch and the rear wheel to skid. When riding downhill or shifting into first gear, you may need to use the brakes to slow to a safe speed before downshifting.

Most wobbles can be traced to improper loading, unsuitable accessories, or incorrect tire pressure. Do not try to accelerate out of a wobble.

Warning signs are yellow with black lettering or symbols and provide important information to motorists about upcoming road conditions.