Arizona Motorcycle Permit Test

Avoid riding directly alongside another vehicle, since this may place you in the vehicle's blind spot. If the driver can't see you, they may enter your lane without warning. Riding alongside a vehicle is also dangerous because the vehicle will block your route of escape if a hazard arises.

Passengers should sit directly behind the operator and lean as the operator leans. They should sit as far forward as they can without crowding the operator, holding onto the operator's waist, hips, or belt.

Under normal conditions, you should allow at least two seconds of distance between you and the vehicle ahead of you. Increase your following distance any time conditions are less than ideal.

You can reduce your risk of injury when riding a motorcycle by wearing an approved helmet, face or eye protection, and protective clothing.

The only way to remove the alcoholic content of a drink from your body is to allow your body time to eliminate it. There are no shortcuts to sobering up.

All passes must be completed within the posted speed limits and only in areas where passing is permitted.

A properly chosen lane position should provide a number of benefits, including an increased ability to see others and to be seen. It should help you avoid wind blasts, other drivers' blind spots, and surface hazards. Your lane position should discourage other drivers from trying to share your lane and provide you with an escape route, should a hazard arise.

To maximize your ability to be seen at an intersection, ride with your headlight on and select a lane position that provides oncoming traffic with the best view of your motorcycle. Maintain a space cushion that allows you enough space to take evasive action if a hazard arises. You should never assume that making eye contact with a driver will be enough to make them consciously register your presence.