Knowledge Test Class B
This license is required for driving a single vehicle with a GVWR of more than 26,001 pounds, and a trailer not to exceed 10,000 pounds gross vehicle weight rating, or a vehicle designed to transport 24 or more people (including the driver). To receive this license, applicants must pass a 50-question test. To pass, applicants must answer 40 questions correctly. Each question has three possible answer choices. Test questions come from the Arizona Commercial Driver License Manual. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Pre-Trip Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-Road Driving.. Endorsements that may be used with a Class B CDL are: Hazardous materials, Tank, Passenger, HazMat and Tank, Air Brakes and School bus.
Number of Question
Passing Score
1. Hanging meat:
Explanation
An operator should drive with care when transporting a cargo of hanging meat. Such a load is unstable, both because it has a high center of gravity and because the swinging of the meat can affect the driver's handling of the vehicle.
2. What does the air compressor governor do?
Explanation
In an air brake system, the air compressor governor controls when the air compressor pumps air into the storage tanks. It stops pumping if the pressure in the tanks becomes too high, and begins pumping if the pressure becomes too low.
3. What is a Gross Vehicle Weight Rating (GVWR)?
Explanation
Gross Vehicle Weight Rating (GVWR) is the value specified by the manufacturer as the loaded weight of a single vehicle.
4. When applying your brakes, the vehicle should:
Explanation
Your vehicle pulling to one side or the other while you are braking can indicate trouble with the brakes.
5. You should test the low pressure warning signal by:
Explanation
It is essential that your low pressure warning light functions properly. After allowing the system to charge, you can test the warning signal by rapidly applying and releasing the brake pedal. This will release air from the braking system and the warning signal should come on when pressure drops to a dangerous level.
6. Air brakes use ____ to function.
Explanation
Air brakes function through the use of compressed air.
7. When starting a vehicle, warning lights and buzzers:
Explanation
After starting a vehicle's engine, the warning lights and buzzers should turn on, then quickly turn off.
Frequently Asked Questions
A Class B CDL (Commercial Driver's License) is a type of license that allows drivers to operate commercial vehicles that weigh over 26,000 pounds or transport hazardous materials. In Arizona, a Class B CDL also allows drivers to operate vehicles with three or more axles, as well as buses with a seating capacity of more than 15 passengers.
To obtain a Class B CDL in Arizona, you must first obtain a learner's permit by passing a written test. You must then pass a skills test, which includes a pre-trip inspection, basic vehicle control, and on-road driving. You must also meet certain medical and vision requirements and provide proof of residency and identity.
Once you have obtained your Class B CDL in Arizona, you must follow all state and federal regulations related to commercial driving. This includes maintaining accurate logs of your driving hours and following all safety regulations when transporting hazardous materials. Additionally, you may be subject to regular drug and alcohol testing as part of your job requirements.
To obtain a Class B CDL in Arizona, you must first obtain a learner's permit by passing a written test. You must then pass a skills test, which includes a pre-trip inspection, basic vehicle control, and on-road driving. You must also meet certain medical and vision requirements and provide proof of residency and identity.
Once you have obtained your Class B CDL in Arizona, you must follow all state and federal regulations related to commercial driving. This includes maintaining accurate logs of your driving hours and following all safety regulations when transporting hazardous materials. Additionally, you may be subject to regular drug and alcohol testing as part of your job requirements.
With a Class B CDL license in Arizona, you can operate the following types of vehicles:
1. Single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, including passenger cars or other vehicles towing a trailer weighing less than 10,000 pounds.
2. Buses with a seating capacity of 16 passengers or more, including the driver.
3. Vehicles designed to transport hazardous materials in quantities that require placards.
Some examples of vehicles that you may be able to operate with a Class B CDL license in Arizona include delivery trucks, dump trucks, tow trucks, and buses. However, it's important to note that there may be additional endorsements or qualifications required for certain types of vehicles or cargo.
1. Single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, including passenger cars or other vehicles towing a trailer weighing less than 10,000 pounds.
2. Buses with a seating capacity of 16 passengers or more, including the driver.
3. Vehicles designed to transport hazardous materials in quantities that require placards.
Some examples of vehicles that you may be able to operate with a Class B CDL license in Arizona include delivery trucks, dump trucks, tow trucks, and buses. However, it's important to note that there may be additional endorsements or qualifications required for certain types of vehicles or cargo.
To obtain a Class B CDL license in Arizona, you must meet the following requirements:
1. Be at least 18 years old (21 years old to operate interstate).
2. Hold a valid Arizona driver's license.
3. Pass a medical examination and obtain a medical certificate.
4. Provide proof of identity and residency.
5. Obtain a commercial learner's permit (CLP) by passing a written knowledge test.
6. Hold the CLP for at least 14 days before taking the skills test.
7. Pass a skills test, which includes a pre-trip inspection, basic vehicle control, and on-road driving.
8. Pay the required fees.
In addition to these requirements, you will also need to meet any additional qualifications or endorsements required for specific types of vehicles or cargo. For example, if you plan to transport hazardous materials, you will need to obtain a Hazardous Materials (H) endorsement by passing an additional knowledge test and undergoing a security threat assessment.
1. Be at least 18 years old (21 years old to operate interstate).
2. Hold a valid Arizona driver's license.
3. Pass a medical examination and obtain a medical certificate.
4. Provide proof of identity and residency.
5. Obtain a commercial learner's permit (CLP) by passing a written knowledge test.
6. Hold the CLP for at least 14 days before taking the skills test.
7. Pass a skills test, which includes a pre-trip inspection, basic vehicle control, and on-road driving.
8. Pay the required fees.
In addition to these requirements, you will also need to meet any additional qualifications or endorsements required for specific types of vehicles or cargo. For example, if you plan to transport hazardous materials, you will need to obtain a Hazardous Materials (H) endorsement by passing an additional knowledge test and undergoing a security threat assessment.
The minimum age requirement for a Class B CDL license in Arizona is 18 years old. However, drivers who are 18-20 years old are restricted to driving within the state of Arizona and cannot transport hazardous materials or operate a commercial motor vehicle that is equipped with air brakes.
If you plan to drive a commercial motor vehicle across state lines, you must be at least 21 years old. This is due to federal regulations set by the Federal Motor Carrier Safety Administration (FMCSA).
If you plan to drive a commercial motor vehicle across state lines, you must be at least 21 years old. This is due to federal regulations set by the Federal Motor Carrier Safety Administration (FMCSA).
Whether you need endorsements for a Class B CDL license depends on the type of vehicle you plan to drive and the cargo you plan to transport. The following are the endorsements that you may need for a Class B CDL license in Arizona:
1. Passenger (P) endorsement: required to drive a vehicle designed to transport 16 or more passengers, including the driver.
2. School bus (S) endorsement: required to drive a school bus.
3. Tank vehicle (N) endorsement: required to transport liquid or gaseous materials in a tank or tanks having an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more.
4. Hazardous materials (H) endorsement: required to transport hazardous materials as defined by federal law.
To obtain an endorsement, you must pass a written knowledge test and in some cases, additional skills tests or background checks. It is important to note that some endorsements may also require additional fees and training.
1. Passenger (P) endorsement: required to drive a vehicle designed to transport 16 or more passengers, including the driver.
2. School bus (S) endorsement: required to drive a school bus.
3. Tank vehicle (N) endorsement: required to transport liquid or gaseous materials in a tank or tanks having an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more.
4. Hazardous materials (H) endorsement: required to transport hazardous materials as defined by federal law.
To obtain an endorsement, you must pass a written knowledge test and in some cases, additional skills tests or background checks. It is important to note that some endorsements may also require additional fees and training.
The Class B CDL skills test consists of three parts: a pre-trip inspection, basic vehicle control skills, and an on-road driving test. Here is a brief overview of each part:
1. Pre-trip inspection: You will be asked to inspect your vehicle and demonstrate your knowledge of the vehicle's safety components and operation. You will be required to explain and demonstrate how to inspect items such as the engine compartment, tires, brakes, lights, and more.
2. Basic vehicle control skills: You will be tested on your ability to control the vehicle in various situations. This may include backing up in a straight line, making tight turns, stopping smoothly, and more.
3. On-road driving test: You will be evaluated on your ability to safely operate the vehicle on public roads. You will be asked to drive in various traffic situations, including intersections, turns, lane changes, and more.
It is important to note that the specific requirements for the Class B CDL skills test may vary depending on the state you are in. Be sure to check with your local Department of Motor Vehicles for specific details about the skills test.
1. Pre-trip inspection: You will be asked to inspect your vehicle and demonstrate your knowledge of the vehicle's safety components and operation. You will be required to explain and demonstrate how to inspect items such as the engine compartment, tires, brakes, lights, and more.
2. Basic vehicle control skills: You will be tested on your ability to control the vehicle in various situations. This may include backing up in a straight line, making tight turns, stopping smoothly, and more.
3. On-road driving test: You will be evaluated on your ability to safely operate the vehicle on public roads. You will be asked to drive in various traffic situations, including intersections, turns, lane changes, and more.
It is important to note that the specific requirements for the Class B CDL skills test may vary depending on the state you are in. Be sure to check with your local Department of Motor Vehicles for specific details about the skills test.
Yes, there are restrictions and limitations for drivers with a Class B CDL license. Here are some of the common restrictions and limitations:
1. Vehicle type: A Class B CDL license allows you to operate a single vehicle with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or a combination of vehicles with a GCWR of less than 26,001 pounds (towing a trailer with a GVWR of less than 10,000 pounds). You are not allowed to operate a combination of vehicles with a GCWR of 26,001 pounds or more.
2. Passenger and hazardous materials: If you do not have the required endorsements, you are not allowed to transport passengers or hazardous materials.
3. State-specific restrictions: Some states may have additional restrictions or limitations for Class B CDL license holders. For example, some states may require additional endorsements or restrict driving during certain hours.
4. Medical certification: You are required to have a valid medical certificate to operate a commercial vehicle. The medical certificate must be renewed every two years.
It is important to note that the specific restrictions and limitations for Class B CDL license holders may vary depending on the state you are in. Be sure to check with your local Department of Motor Vehicles for specific details about Class B CDL license restrictions and limitations in your state.
1. Vehicle type: A Class B CDL license allows you to operate a single vehicle with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or a combination of vehicles with a GCWR of less than 26,001 pounds (towing a trailer with a GVWR of less than 10,000 pounds). You are not allowed to operate a combination of vehicles with a GCWR of 26,001 pounds or more.
2. Passenger and hazardous materials: If you do not have the required endorsements, you are not allowed to transport passengers or hazardous materials.
3. State-specific restrictions: Some states may have additional restrictions or limitations for Class B CDL license holders. For example, some states may require additional endorsements or restrict driving during certain hours.
4. Medical certification: You are required to have a valid medical certificate to operate a commercial vehicle. The medical certificate must be renewed every two years.
It is important to note that the specific restrictions and limitations for Class B CDL license holders may vary depending on the state you are in. Be sure to check with your local Department of Motor Vehicles for specific details about Class B CDL license restrictions and limitations in your state.
It depends on the state you are in. In some states, the Class B CDL written test may be available in languages other than English. However, in other states, the test may only be available in English. Some states may also allow you to use an interpreter during the test.
If you are not comfortable taking the test in English, it is important to check with your local Department of Motor Vehicles to find out if the test is available in your preferred language. If it is not, you may need to take steps to improve your English language skills before taking the test.
It is also important to note that even if the written test is available in a language other than English, you will still need to be able to communicate effectively in English to pass the overall CDL exam. This is because the CDL exam includes a skills test that requires verbal communication with an examiner.
If you are not comfortable taking the test in English, it is important to check with your local Department of Motor Vehicles to find out if the test is available in your preferred language. If it is not, you may need to take steps to improve your English language skills before taking the test.
It is also important to note that even if the written test is available in a language other than English, you will still need to be able to communicate effectively in English to pass the overall CDL exam. This is because the CDL exam includes a skills test that requires verbal communication with an examiner.
Yes, you can request accommodations for the Class B CDL written test if you have a disability that makes it difficult for you to take the test under standard conditions. The Americans with Disabilities Act (ADA) requires that all individuals with disabilities have equal access to services and programs, including those related to licensing and certification.
To request accommodations for the Class B CDL written test, you will need to contact your local Department of Motor Vehicles and provide documentation of your disability. The DMV will then work with you to determine what accommodations are appropriate based on your specific needs and the requirements of the test.
Examples of accommodations that may be provided include extended time to complete the test, a separate testing room, a reader or interpreter, or a Braille or large-print version of the test. The specific accommodations provided will depend on your individual needs and the resources available at your local DMV.
It is important to note that you will need to make your request for accommodations in advance of the testing date so that the DMV has time to make arrangements.
To request accommodations for the Class B CDL written test, you will need to contact your local Department of Motor Vehicles and provide documentation of your disability. The DMV will then work with you to determine what accommodations are appropriate based on your specific needs and the requirements of the test.
Examples of accommodations that may be provided include extended time to complete the test, a separate testing room, a reader or interpreter, or a Braille or large-print version of the test. The specific accommodations provided will depend on your individual needs and the resources available at your local DMV.
It is important to note that you will need to make your request for accommodations in advance of the testing date so that the DMV has time to make arrangements.
If you fail the Class B CDL written test, you will usually be allowed to retake the test after a certain period of time. The specific waiting period and number of allowed attempts may vary depending on the state you are in.
In most states, you will need to pay a fee for each retake of the test. It is important to study and prepare thoroughly before taking the test again to increase your chances of passing.
If you fail the written test multiple times, you may be required to take a CDL training course before being allowed to retake the test. This can be a significant expense and time commitment, so it is important to take the preparation and studying for the test seriously.
It is important to note that if you fail the skills or road test required for obtaining a CDL, you may need to wait even longer before being allowed to retake the test. This waiting period can be several months or more.
In most states, you will need to pay a fee for each retake of the test. It is important to study and prepare thoroughly before taking the test again to increase your chances of passing.
If you fail the written test multiple times, you may be required to take a CDL training course before being allowed to retake the test. This can be a significant expense and time commitment, so it is important to take the preparation and studying for the test seriously.
It is important to note that if you fail the skills or road test required for obtaining a CDL, you may need to wait even longer before being allowed to retake the test. This waiting period can be several months or more.
