This endorsement is required to haul any liquid or gaseous materials in a tank or tanks having a capacity of 1,000 gallons or more that is either permanently or temporarily attached to the vehicle or chassis. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. Each question has three or four possible answer choices. To pass, the applicant must answer at least 16 questions correctly. Test questions come from the South Dakota Commercial Driver License Manual. Questions come from chapters covering: Driving Safely, Tank Vehicles, Hazardous Materials and Combination Vehicles. The Tank endorsement can be used with the Class A, B or C CDL.
8. An air supply control lever should be in its "normal" position when you are:
Tractor protection controls in older vehicles may be operated by levers instead of knobs. If an air supply control is set in its "normal" position, it is properly set for you to pull a trailer.
9. When driving:
It is important to communicate your intentions to others on the road. Make sure to signal before turning or changing lanes, even if no other vehicles are nearby.
10. When transporting cargo, drivers must check the securement of the cargo every:
The securement of cargo must be checked before beginning a trip, within the first 50 miles of a trip, and then again every three hours or 150 miles.
11. If a package of hazardous materials is not large enough to hold a label, it should be labeled:
If a hazardous materials label will not fit onto a package, it may be placed on a tag that is securely attached to the package.
12. Stopping distance can be affected by:
Factors that can affect stopping distance include your vehicle's speed, its weight, and how slippery the road surface is.
13. If you need to travel down a hill, you should switch into a lower gear:
Always downshift before beginning to drive downhill. Forcing an automatic transmission into a lower gear at a high speed could damage the transmission and also lead to a loss of ability to engine brake. Drive at a speed that will allow you to control your vehicle without overusing your brakes. When determining a safe speed to drive, you should take into account the steepness of the grade, the length of the grade, the weight of your vehicle, road conditions, and weather conditions.
14. Which of the following is not a problem?
When inspecting an exhaust system, you should verify that parts of the system are not loose, broken, or missing. The system's parts must be properly mounted and should not be rubbing against moving parts of the vehicle.
Frequently Asked Questions
1. Meet the eligibility requirements: You must be at least 21 years old, hold a valid South Dakota CDL, and have a clean driving record.
2. Study the South Dakota Commercial Driver License Manual: This manual covers all of the information you need to know for the Tank endorsement test, including information about driving tank vehicles, handling hazardous materials, and safety procedures.
3. Schedule an appointment at a South Dakota Department of Public Safety (DPS) Exam Station: You can schedule an appointment online or by calling the DPS Exam Station.
4. Pass the Tank endorsement knowledge test: This test will assess your knowledge of tank vehicle operation and safety procedures.
5. Pay the required fee: The fee for a Tank endorsement is $5.00 in addition to any other CDL fees that may apply.
6. Pass a skills test (if required): If you are adding the Tank endorsement to your CDL, you may need to pass a skills test that includes a pre-trip inspection, basic vehicle controls, and on-road driving.
Once you have completed these steps, you will receive your Tank endorsement on your South Dakota CDL.
1. Be at least 21 years old: You must be at least 21 years old to operate a commercial vehicle across state lines, including tank vehicles.
2. Hold a valid South Dakota CDL: You must have a valid South Dakota Commercial Driver License (CDL) before you can apply for a Tank endorsement.
3. Have a clean driving record: You must have a clean driving record without any disqualifying offenses or serious traffic violations.
4. Pass the Tank endorsement knowledge test: You must demonstrate knowledge of tank vehicle operation and safety procedures by passing the Tank endorsement knowledge test.
5. Pass a skills test (if required): If you are adding the Tank endorsement to your CDL, you may need to pass a skills test that includes a pre-trip inspection, basic vehicle controls, and on-road driving.
6. Pay the required fee: The fee for a Tank endorsement is $5.00 in addition to any other CDL fees that may apply.
It's important to note that if you are transporting hazardous materials in addition to operating a tank vehicle, you will also need to obtain a Hazardous Materials (HazMat) endorsement on your CDL.
Additionally, if you are transporting hazardous materials in addition to operating a tank vehicle, you will need to complete Hazardous Materials (HazMat) training and pass a HazMat knowledge test before obtaining a HazMat endorsement on your CDL.
It's also important to note that some employers may require additional training or experience beyond what is required by the state in order to operate a tank vehicle safely. It's always a good idea to check with your employer or potential employers for any additional training or certification requirements.
The Tank endorsement knowledge test is in addition to the other CDL written tests required for your license class, which includes the general knowledge test and any additional endorsement tests you may need. If you are also transporting hazardous materials, you will need to pass a separate HazMat endorsement knowledge test.
It's important to note that the Tank endorsement knowledge test is not the same as the skills test. The skills test is a practical exam that evaluates your ability to safely operate a tank vehicle and perform basic maneuvers like backing up, turning, and parking. The skills test is conducted on a closed course or public road and is administered by an authorized examiner.
1. Tank vehicle inspection: This section covers the pre-trip inspection process for tank vehicles, including checking for leaks, proper securement, and other safety considerations.
2. Tank vehicle operation: This section covers safe driving practices for tank vehicles, including maintaining a safe following distance, controlling speed on curves, and avoiding rollovers.
3. Tank vehicle loading and unloading: This section covers proper loading and unloading procedures for liquids or gases transported in tank vehicles, including ensuring proper balance and preventing spills or leaks.
4. Tank vehicle maintenance: This section covers best practices for maintaining a tank vehicle, including regular inspections and repairs to prevent mechanical failures.
5. Hazardous materials regulations: If you are transporting hazardous materials, this section covers the federal regulations for handling and transporting hazardous materials safely.
The exact content of the Tank endorsement knowledge test may vary depending on the state's requirements and any additional endorsements you may be pursuing.
1. Driving in a straight line: You may be asked to drive the tank vehicle in a straight line while maintaining control and keeping the vehicle centered in the lane.
2. Stopping and starting: You may be asked to demonstrate your ability to stop and start the tank vehicle smoothly, without rolling back or stalling.
3. Turning: You may be asked to turn the tank vehicle around corners or navigate through a series of obstacles while maintaining control and avoiding hitting any cones or barriers.
4. Backing up: You may be asked to back up the tank vehicle into a tight space or around an obstacle while maintaining control and avoiding any hazards.
5. Emergency maneuvers: You may be asked to demonstrate your ability to respond to emergency situations, such as sudden stops or evasive maneuvers, while keeping the tank vehicle under control.
It's important to check with your state's Department of Motor Vehicles (DMV) for specific requirements and guidelines for the Tank endorsement skills test.
Regarding restrictions or limitations for drivers with a CDL Tank endorsement, there are no specific restrictions or limitations associated with this endorsement alone. However, drivers who are transporting hazardous materials in tanks will need to adhere to additional regulations and restrictions, such as placarding requirements, route restrictions, and other safety-related considerations. Additionally, all CDL drivers must comply with federal regulations regarding hours of service, drug and alcohol testing, and other safety requirements.
Without the Tank endorsement, you would not be authorized to operate a tank vehicle that transports liquid or gas materials, and you could be subject to fines or other penalties if you are caught doing so. It's important to obtain the proper endorsements and licenses before operating any commercial motor vehicle in order to ensure safety and legal compliance.
To add the Tank endorsement to your CDL license, you will need to pass a written knowledge test that covers topics such as proper loading and unloading procedures, tank vehicle inspection, and safe driving techniques. Once you pass the knowledge test, you will be eligible to take the Tank endorsement skills test, which includes a series of exercises designed to evaluate your ability to safely operate a tank vehicle.
If you pass both tests, your CDL license will be updated to include the Tank endorsement. You will not need to apply for a new license, but you may need to pay a fee for the endorsement and provide proof of insurance or other documentation as required by your state's DMV.