Oklahoma CDL Permit Test - Passenger

There are two indicators that determine when you need to shift into a higher gear. One indicator is the engine speed (rpm). You should read your vehicle's manual to learn its rpm range and shift up when you reach the top of that range. The other indicator is road speed (mph). You should learn which speeds each gear can accommodate, then keep an eye on the speedometer and shift up as needed.

When braking, push the pedal down gradually to ensure that the vehicle comes to a smooth, safe stop.

When inspecting a vehicle equipped with power steering, you should inspect the hoses, pumps, and fluid levels. Specifically check the hoses for leaks.

On a steep downgrade, you must use the engine's braking effect as your primary method of speed control. Be sure to decelerate and downshift appropriately before beginning to drive down the hill. Relying too heavily on the brakes may cause them to overheat and fade, becoming less effective.

The aisles and stairwells on a bus must always be kept clear. It is important to keep aisles clear so that no passengers trip while using them.

Roads are particularly slippery when it first begins to rain. The water mixes with oil drippings on the road that have not yet washed away, creating a slippery and dangerous mixture.

Use your senses during trips to help you identify mechanical issues. If you see, hear, smell, or feel anything that could indicate trouble, you should stop and check it out.