This endorsement is required to haul any liquid or gaseous materials in a tank or tanks having a capacity of 1,000 gallons or more that is either permanently or temporarily attached to the vehicle or chassis. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. Each question has four possible answer choices. To pass, the applicant must answer at least 16 questions correctly. Test questions come from the New Hampshire CDL Driver’s Guide. Questions come from chapters covering: Driving Safely, Tank Vehicles, Hazardous Materials and Combination Vehicles. The Tank endorsement can be used with the Class A, B or C CDL.
1. If your engine runs a pump used during delivery of compressed gas, you should turn off the engine:
Unless your engine runs a pump for product transfer, turn it off when loading or unloading a compressed gas tank. If you do use your engine to run a pump, you should turn the engine off after the product transfer but before unhooking the hoses.
2. ____ are the most likely to be affected by strong winds.
Strong winds can make it difficult for a driver to maintain control of their vehicle. Usually, this is especially true for drivers of lighter CMVs.
3. When driving, keeping space between your vehicle and other vehicles is:
For the safety of everyone on the road, it is essential that you maintain adequate cushions of space between your vehicle and other vehicles. This will help ensure that if you need to stop your vehicle, you will be able to do so without hitting someone else.
4. To help prevent a rollover, cargo should be:
If a vehicle is top-heavy, it is more likely to roll over. The weight of cargo should be positioned as low in a trailer as possible to minimize this risk.
5. To distinguish between hazardous and non-hazardous materials on a shipping paper:
If a shipping paper includes information about both hazardous and non-hazardous materials, the hazardous materials must be differentiated in one of three ways. They must be listed first, highlighted in a contrasting color, or identified with an "X" placed before the shipping description in a column labeled "HM."
6. During an inspection, it is most important to check your tank vehicle for:
When inspecting any style of tank, the most important thing for a driver to check for is leaks. Transporting any type of gas or liquid in a leaking tank is illegal.
7. When loading liquid cargo, you should take the ____ into account.
Factors that affect how much liquid is safe to load into your tank include how much the liquid will expand in transit, the weight of the liquid, and legal weight limits.
Frequently Asked Questions
1. Meet the eligibility requirements: You must hold a valid New Hampshire CDL and pass the hazardous materials knowledge test.
2. Obtain a Tanker Vehicle (N) Endorsement: To obtain a Tanker Vehicle (N) endorsement, you must pass a knowledge test that covers topics such as loading and unloading tank vehicles, safe driving practices, and inspection of tank vehicles. You can schedule an appointment with the DMV to take the test.
3. Submit Medical Certificate: You must submit a current Medical Examiner's Certificate (MEC) to the DMV.
4. Pay the fees: There is a fee to obtain a CDL Tank endorsement in New Hampshire. You can pay this fee at the time of application.
5. Practice driving and obtain on-the-job training: To become proficient in driving tank vehicles, you may need to practice driving with an experienced driver or take specialized training.
6. Pass the skills test: You must pass a skills test that demonstrates your ability to safely operate a tank vehicle.
7. Receive your CDL Tank endorsement: Once you have completed all of the above steps, you will receive your CDL Tank endorsement from the DMV.
Note: It is important to keep in mind that obtaining a Tanker endorsement is just one part of obtaining a CDL with endorsements in New Hampshire. You may also need to obtain other endorsements depending on the type of commercial vehicle you plan to operate.
1. Be at least 21 years old: You must be at least 21 years old to operate a commercial vehicle across state lines or transport hazardous materials.
2. Hold a valid New Hampshire driver's license: You must hold a valid New Hampshire driver's license and have a clean driving record.
3. Obtain a commercial learner's permit (CLP): Before you can apply for a CDL with a Tank endorsement, you must obtain a CLP and hold it for at least 14 days. To obtain a CLP, you must pass the written knowledge test and meet all other eligibility requirements.
4. Pass the CDL Tanker endorsement knowledge test: You must pass a knowledge test that covers topics such as loading and unloading tank vehicles, safe driving practices, and inspection of tank vehicles.
5. Submit your Medical Examiner's Certificate (MEC): You must submit a current MEC that shows you are physically qualified to operate a commercial vehicle.
6. Pass the skills test: You must pass a skills test that demonstrates your ability to safely operate a tank vehicle. The skills test will include pre-trip inspections, basic control skills tests, and an on-road driving test.
7. Pay the fees: There are fees associated with obtaining a CDL Tank license in New Hampshire. You can pay these fees at the time of application.
Note: It is important to keep in mind that obtaining a CDL with Tank endorsement is just one part of obtaining your CDL in New Hampshire. Depending on the type of commercial vehicle you plan to operate, you may also need to obtain other endorsements such as Hazmat or Double/Triple trailers.
Tank vehicles have unique handling characteristics due to the weight and movement of the liquid cargo they carry. It's important to understand how to handle these vehicles safely and effectively, especially when operating on hills, curves, or other challenging road conditions.
Some employers may require specialized training or on-the-job experience before allowing you to operate a tank vehicle. It's important to check with potential employers about their specific requirements for tank vehicle operation.
Additionally, the Federal Motor Carrier Safety Administration (FMCSA) requires drivers who transport hazardous materials by tanker to complete specialized training in hazardous materials handling and transportation. This training must be provided by an approved Hazmat instructor and includes classroom instruction, hands-on training, and a written test.
Overall, while there are no specific New Hampshire state requirements for training or experience to obtain a Tanker endorsement, it's important to ensure that you have the knowledge and skills necessary to safely operate these specialized vehicles.
1. Tanker vehicle inspection: You will be tested on your knowledge of the inspection process for a tanker vehicle, including the inspection of valves, pumps, hoses, and other equipment.
2. Loading and unloading procedures: You will be tested on your knowledge of the procedures for loading and unloading liquids, gases, and other materials into and out of a tanker vehicle.
3. Safe driving practices: You will be tested on your knowledge of safety practices specific to operating a tanker vehicle, including how to handle a vehicle's weight distribution and how to drive safely in hazardous conditions.
4. Emergency response: You will be tested on your knowledge of how to respond in the event of an emergency involving a tanker vehicle, including proper procedures for stopping and dealing with spills or leaks.
It's important to note that the Tanker endorsement test is in addition to the general CDL knowledge test that all commercial driver's license applicants must pass. To obtain a CDL with a Tanker endorsement in New Hampshire, you must pass both the general knowledge test and the Tanker endorsement test.
1. Inspection of Tank Vehicles: You will be tested on your knowledge of how to perform a pre-trip inspection on a tanker vehicle, including checking the tank's structural integrity, valves, pumps, hoses, and other equipment.
2. Safe Driving Practices: You will be tested on your knowledge of safe driving practices when operating a tanker vehicle, including how to handle a vehicle's weight distribution and how to drive safely in hazardous conditions.
3. Loading and Unloading Procedures: You will be tested on your knowledge of the procedures for loading and unloading liquids, gases, and other materials into and out of a tanker vehicle.
4. Hazardous Materials Transportation: You will be tested on your knowledge of the regulations for transporting hazardous materials in a tanker vehicle, including labeling requirements, placarding requirements, and emergency response procedures.
5. Emergency Response: You will be tested on your knowledge of how to respond in the event of an emergency involving a tanker vehicle, including proper procedures for stopping and dealing with spills or leaks.
6. Specialized Equipment: You may be tested on your knowledge of specialized equipment used in tanker operations, including pumps, hoses, safety equipment, and other devices.
It's important to thoroughly study all of these topics before taking the Tank endorsement written test to ensure that you are fully prepared to operate a tanker vehicle safely and effectively.
Here are some of the skills and maneuvers you may need to demonstrate during the CDL Tank endorsement test:
1. Basic control: You may be required to show that you can safely control the tanker vehicle by performing maneuvers such as backing up, turning, and parking.
2. Pre-trip inspection: You will need to demonstrate your knowledge of how to perform a pre-trip inspection on a tanker vehicle, including checking the tank's structural integrity, valves, pumps, hoses, and other equipment.
3. Loading and unloading procedures: You may be required to demonstrate your ability to safely load and unload liquids or gases from a tanker vehicle.
4. Emergency response: You may be required to demonstrate your knowledge of how to respond in the event of an emergency involving a tanker vehicle, including proper procedures for stopping and dealing with spills or leaks.
It's important to note that the specific skills and maneuvers required during the CDL Tank endorsement test can vary depending on the testing location and the examiner. Be sure to review the New Hampshire Commercial Driver License Manual for Tank Vehicles for more information on what you can expect during the practical skills test.
1. Endorsement-specific restriction: Drivers with a CDL Tank endorsement may only operate tanker vehicles that are transporting liquids or gases. They cannot operate vehicles that transport dry bulk materials, such as grain or sand.
2. Special training requirement: Drivers with a CDL Tank endorsement are required to complete specialized training in order to safely operate tanker vehicles. This training must be completed before the driver can apply for the endorsement.
3. Hazardous materials restriction: If a driver is transporting hazardous materials in addition to liquids or gases, they may also need to have a Hazardous Materials (HazMat) endorsement on their CDL.
4. Vehicle-specific restrictions: The specific vehicle that a driver is operating may also have certain restrictions or limitations based on its size, weight, or other factors.
It's important for drivers with a CDL Tank endorsement to be aware of these restrictions and limitations in order to ensure they are operating their vehicle safely and within the parameters of their license.
In New Hampshire, a CDL Tank endorsement is required for anyone who operates a commercial motor vehicle (CMV) that is designed to transport liquids or gases in bulk containers of 1,000 gallons or more, or multiple smaller containers totaling 1,000 gallons or more. This means that if you are transporting these materials in a tanker truck or other similar vehicle, you must have a CDL Tank endorsement.
It's important to note that there are other requirements for transporting hazardous materials and other types of cargo that may also require additional endorsements or certifications. It's always best to check with the New Hampshire DMV and the Federal Motor Carrier Safety Administration (FMCSA) to ensure you have all the necessary endorsements and certifications to legally transport your cargo.
To add the CDL Tank endorsement to your license, you will need to pass the appropriate knowledge and skills tests, as well as any other requirements that may be necessary in your state. The knowledge test will cover topics such as tanker vehicle inspection, proper loading and unloading procedures, and safe driving practices for tank vehicles. The skills test will evaluate your ability to operate a tank vehicle safely on the road.
Once you have passed the required tests and met all other requirements, you will be issued a new CDL with the Tank endorsement added to it. It's important to remember that you must maintain all necessary endorsements and certifications in order to legally operate your commercial motor vehicle.
It's always best to check with the New Hampshire DMV or a certified CDL training school for information on how to add a CDL Tank endorsement to your license, as requirements can vary by state.
To transport hazardous materials with a CDL Tank endorsement, you must also have a Hazardous Materials (HazMat) endorsement. You will need to pass additional knowledge and skills tests related to the safe handling and transportation of hazardous materials.
In addition to the HazMat endorsement, there are several other regulations that must be followed when transporting hazardous materials. These regulations are established by the Federal Motor Carrier Safety Administration (FMCSA) and include:
1. Proper labeling and marking of hazardous materials containers
2. Proper loading and unloading procedures
3. Use of appropriate personal protective equipment (PPE)
4. Compliance with route restrictions and other safety requirements
5. Emergency response procedures in case of an accident or spill
It's important to note that violations of hazardous materials regulations can result in severe penalties, including fines and suspension or revocation of your CDL. It's always best to stay up-to-date on the latest regulations and procedures for handling hazardous materials, and to seek out additional training or certifications if necessary.