Tank

This endorsement is required to haul any liquid or gaseous materials in a tank or tanks having a capacity of 1,000 gallons or more that is either permanently or temporarily attached to the vehicle or.. Read More

This endorsement is required to haul any liquid or gaseous materials in a tank or tanks having a capacity of 1,000 gallons or more that is either permanently or temporarily attached to the vehicle or chassis. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. Each question has three or four possible answer choices. To pass, the applicant must answer at least 16 questions correctly. Test questions come from the Mississippi Professional Driver’s Manual. Questions come from chapters covering: Transporting Cargo, Transporting Passengers and Tank Vehicles. The Tank endorsement can be used with the Class A, B or C CDL.

Number of Question
Passing Score

1. During a bus ride:

Explanation
Do not allow riders to leave carry-on baggage in any doorway or aisle. There should be nothing in the aisle that might trip other riders. Secure baggage in a way that prevents damage.

2. Tanks have high centers of gravity, which means:

Explanation
Tank vehicles have high centers of gravity, which makes them vulnerable to rollover.

3. In general, before loading or unloading any flammable liquids, an engine should be:

Explanation
Before loading or unloading a tank with flammable liquids, you should turn off the engine, unless running the engine is necessary to operate a pump. Ground the tank before opening the filling hole and maintain the ground until after closing the filling hole.

4. Identification numbers assigned to chemicals can be found:

Explanation
The United States Department of Transportation (DOT)’s Emergency Response Guidebook (ERG) lists all hazardous chemicals and their assigned identification numbers.

5. Driving with a cargo of hanging meat in a trailer:

Explanation
An operator should drive with care when transporting a cargo of hanging meat. Such a load is unstable, both because it has a high center of gravity and because the swinging of the meat can affect the driver's handling of the vehicle.

6. When loading or unloading a tank that is divided by bulkheads, equal weight distribution is:

Explanation
Some tanks are divided into multiple smaller tanks by bulkheads. When loading or unloading such tanks, pay attention to weight distribution. Be careful not to place too much weight on a single end of the tank.

7. Manhole covers:

Explanation
Be sure to inspect your vehicle before driving. Never drive a tank vehicle with open valves or manhole covers.

Frequently Asked Questions

To obtain a CDL Tank endorsement in Mississippi, you must follow these steps:

1. Obtain a Mississippi commercial driver's license (CDL): To obtain a CDL, you must be at least 18 years old, have a valid driver's license and pass a series of written and driving tests.

2. Meet the prerequisites for the Tank endorsement: To get a Tank endorsement, you must already have a CDL with a hazardous materials (HazMat) endorsement.

3. Study for the Tank endorsement test: You can obtain the Mississippi CDL manual and study specifically for the Tank endorsement test.

4. Schedule and pass the Tank endorsement knowledge test: You will need to pass a written test that covers knowledge related to transporting liquid or gaseous materials in tanks.

5. Schedule and pass the Tank endorsement skills test: You will need to pass a driving skills test that evaluates your ability to safely operate a tank vehicle.

6. Pay the Tank endorsement fee: Once you have passed both tests, you will need to pay the required fee for the Tank endorsement.

7. Receive your CDL with Tank endorsement: Once you have completed all of the above steps, you will receive your CDL with the Tank endorsement added to it.

To get a CDL Tank license in Mississippi, you must meet the following requirements:

1. Obtain a Commercial Driver's License (CDL): You must be at least 18 years old and possess a valid driver's license to apply for a Mississippi CDL. You must also pass a series of written and driving tests.

2. Obtain a Hazardous Materials (HazMat) endorsement: Before applying for a Tank endorsement, you must already have a HazMat endorsement on your CDL.

3. Pass the Tank endorsement knowledge test: You must pass the written knowledge test that covers topics such as tanker loading and unloading procedures, identifying hazardous materials, and emergency response.

4. Pass the Tank endorsement skills test: You must pass the driving skills test that evaluates your ability to safely operate a tanker vehicle.

5. Meet medical requirements: You must meet the medical requirements set by the Federal Motor Carrier Safety Administration (FMCSA) to operate commercial motor vehicles (CMVs).

6. Pay the required fees: You must pay the required fees for both the Tank endorsement and HazMat endorsement.

It is important to note that additional training may be required by your employer or state regulations before you can legally operate tanker vehicles.

Mississippi state law does not require any specific training or experience to obtain a CDL Tank endorsement. However, it is highly recommended that you receive training before operating a tanker vehicle. This is because driving a tanker vehicle comes with specific challenges such as the risk of rollovers and the need for proper load balancing.

Some employers may require additional training or experience before hiring drivers to operate tanker vehicles, and some states may have their own requirements for tanker endorsement holders. It is important to check with your employer and state regulations to see if there are any additional requirements or training programs you need to complete before operating a tanker vehicle.

In addition, the Federal Motor Carrier Safety Administration (FMCSA) requires all CDL holders to participate in ongoing training related to safety and compliance with regulations. This includes training related to tanker vehicles if you hold a Tank endorsement on your CDL.

Yes, there is an additional written test that you must pass to obtain a CDL Tank endorsement in Mississippi. The Tank endorsement written test covers topics specific to the safe operation of tanker vehicles, such as:

1. Tanker vehicle inspection
2. Tanker loading and unloading procedures
3. Identifying hazardous materials
4. Emergency response procedures
5. Safe driving practices for tanker vehicles

You must pass this written test with a score of at least 80% to obtain your Tank endorsement.

In addition to the Tank endorsement written test, you must also pass a skills test that evaluates your ability to safely operate a tanker vehicle. This skills test will typically be conducted in a tanker vehicle and will assess your ability to perform maneuvers such as turning, backing up, and braking safely while hauling a liquid load.

It is important to note that you must already have a valid CDL before applying for a Tank endorsement, and you must also have a Hazardous Materials (HazMat) endorsement on your CDL before applying for a Tank endorsement.

The CDL Tank endorsement written test covers topics related to the safe operation of tanker vehicles. These topics include:

1. Tanker vehicle inspection: This includes identifying potential hazards and defects that could affect the safe operation of the tanker vehicle, such as leaks, cracks, or other damage.

2. Tanker loading and unloading procedures: This covers proper procedures for loading and unloading liquids or gases into a tanker vehicle, including how to safely handle hazardous materials.

3. Identifying hazardous materials: This includes understanding the different types of hazardous materials that may be transported in a tanker vehicle, as well as how to properly label and handle them.

4. Emergency response procedures: This covers procedures for responding to emergencies such as accidents, spills, or leaks involving a tanker vehicle.

5. Safe driving practices for tanker vehicles: This includes understanding the unique challenges of driving a tanker vehicle, such as the potential for rollovers or loss of control due to shifting loads, and how to drive defensively to prevent accidents.

It is important to study these topics thoroughly before taking the Tank endorsement written test. You can find study materials online or through commercial CDL training programs.

Yes, in addition to passing the CDL Tank endorsement written test, you will also need to pass a skills test that evaluates your ability to safely operate a tanker vehicle. During this skills test, you will need to demonstrate your ability to perform specific maneuvers that are unique to driving a tanker vehicle.

The skills test will typically include the following maneuvers:

1. Pre-trip inspection: You will need to conduct a thorough inspection of the tanker vehicle before driving it, including checking the brakes, lights, tires, and other components.

2. Basic control skills: You will need to demonstrate your ability to control the tanker vehicle in tight spaces and while maneuvering through obstacles such as cones or barrels.

3. On-road driving: You will need to demonstrate your ability to safely operate the tanker vehicle on the road, including making turns, changing lanes, and merging with traffic.

4. Tanker-specific skills: You will also need to demonstrate your ability to safely load and unload liquids or gases into the tanker vehicle, as well as how to handle emergency situations such as leaks or spills.

It is important to practice these maneuvers before taking the CDL Tank endorsement skills test. Commercial CDL training programs can provide hands-on training and practice opportunities that can help you prepare for the skills test.

Yes, there are certain restrictions and limitations that apply to drivers with a CDL Tank endorsement. These restrictions are in place to ensure the safe operation of tanker vehicles and to prevent accidents or spills that could be dangerous to the driver and other motorists.

One of the main restrictions for drivers with a CDL Tank endorsement is the requirement for a hazardous materials endorsement (HME) in addition to the Tank endorsement. This endorsement is required for drivers who transport hazardous materials in quantities that require placards on their vehicle.

Other restrictions that apply to CDL Tank endorsement holders include:

1. Special training requirements: Drivers with a Tank endorsement must complete additional training on the safe operation of tanker vehicles, including how to respond to emergencies such as spills or leaks.

2. Vehicle restrictions: Tanker vehicles may be subject to weight restrictions or other limitations depending on the type of cargo they are carrying.

3. Endorsement renewal requirements: Tank endorsements must be renewed every five years, and drivers may be required to pass additional knowledge or skills tests as part of the renewal process.

It is important for drivers with a CDL Tank endorsement to understand and comply with these restrictions and limitations in order to maintain their safety and the safety of others on the road.

It depends on the specific type and quantity of materials you are transporting. If you are transporting hazardous materials in quantities that require placards on your vehicle, you will need a CDL with a Tank endorsement and a hazardous materials endorsement (HME). This includes liquids and gases that are considered hazardous materials, such as gasoline, propane, or chemicals.

However, if you are transporting non-hazardous liquids or gases in small quantities that do not require placards on your vehicle, you may not need a CDL Tank endorsement. In this case, you would only need a regular commercial driver's license (CDL) with the appropriate class for the weight of your vehicle and cargo.

It is important to check with the Federal Motor Carrier Safety Administration (FMCSA) and your state's Department of Transportation (DOT) to determine the specific requirements for transporting liquids or gases in your area. They can provide guidance on which endorsements or licenses are required based on the type, quantity, and weight of materials you will be transporting.

Yes, you can add a CDL Tank endorsement to your existing CDL license. You will need to pass the Tank Vehicle written test and, if applicable, the skills test for the type of tanker vehicle you will be operating.

To add a Tank endorsement to your CDL license, you will need to visit your state's Department of Motor Vehicles (DMV) or licensing agency and complete the following steps:

1. Submit a completed Commercial Driver's License Application.
2. Provide proof of identity and residency.
3. Pass the written test for the Tank Vehicle endorsement.
4. If applicable, pass the skills test for the type of tanker vehicle you will be operating.
5. Pay any applicable fees.

Once you have completed these steps and passed the necessary tests, your CDL license will be updated to include the Tank endorsement. It is important to note that you must also have a Hazardous Materials endorsement (HME) if you plan to transport hazardous materials in quantities that require placards on your vehicle.

Yes, there are specific requirements and regulations for handling hazardous materials with a CDL Tank endorsement. Here are some important things to keep in mind:

1. Training: You must complete a hazardous materials training program that meets the requirements set forth by the Federal Motor Carrier Safety Administration (FMCSA).

2. Endorsement: In addition to the Tank endorsement, you must also have a Hazardous Materials Endorsement (HME) on your CDL license to transport hazardous materials in quantities that require placards on your vehicle.

3. Placarding: You must display the appropriate placards on your vehicle when transporting hazardous materials. The placards must meet specific size and color requirements.

4. Loading and Unloading: You must follow specific procedures when loading and unloading hazardous materials, including proper handling and securing of the cargo.

5. Reporting Incidents: You must report any incidents involving hazardous materials, including spills or leaks, to the appropriate authorities.

6. Record Keeping: You must maintain accurate records of all hazardous materials transported, including the type of material, quantity, and destination.

It is important to note that there may be additional state or federal regulations that apply to transporting hazardous materials with a CDL Tank endorsement. Be sure to check with your state's Department of Transportation (DOT) and the FMCSA for more information on these regulations.
DMV Writen Test