Directions: Licensing requirements include a vision screening, a knowledge test, and a driving skills test on the satisfactory operation of a motor vehicle.

The knowledge test for your learner's permit is based on information contained in this driver’s manual. To pass the knowledge test, you must demonstrate a basic understanding of Maryland traffic laws. The Knowledge tests include 25 multiple choice questions

If you answer at least 22 questions correctly from the sample test found here AND you have thoroughly read the "Maryland Driver's Handbook" and "All You Need to Know About Your Driver's License", you will be well prepared to take the knowledge test for your learner's permit.

Number of tests:	24
Number of questions:	25
Passing score:	22

Maryland driver's examination

Wait, before you go

Make room for the merging traffic, if possible.
Assert your right-of-way by driving faster.
Always maintain your position.

Upcoming downgrade or hill.
Road construction area.
Upcoming narrowing of roadway.

The driver you passed signals for you to return to your lane.
You signal your intention for three seconds.
You see the headlights of the passed vehicle in your rearview mirror.

One of your rear wheels should touch the curb.
Use your parking brake and leave the vehicle in "park."
Your front wheels should be parallel to the road, if there is no curb.

Slow down and use your low beam headlights.
Slow down and use your high beam headlights.
Turn your lights on and off to warn other drivers.

Have the ability to safely drive at increased speeds.
Be constantly alert.
Both of the above.

Slow down; curving road ahead.
Slow down and do not use your brakes.
Slow down; slippery when wet.

When pavement is wet, reduce your speed.
The road ahead winds in a series of turns or curves.
Traffic increases ahead.