Instructions

Combination

All applicants who are applying for a Class A CDL should be prepared to take the Combination test. This test covers information found in Section 6 of the Commercial Driver License.. Read More

All applicants who are applying for a Class A CDL should be prepared to take the Combination test. This test covers information found in Section 6 of the Commercial Driver License Manual. Section 6 provides the information needed to safely operate tractor-trailers, doubles, triples, and straight trucks with trailers. The test is made up of 20 multiple-choice questions, and applicants will need to correctly answer a minimum of 16 questions to pass. The Combination test is not a replacement for the Double/Triple endorsement test.

Number of Question 20

Passing Score 16

15. Before beginning a trip, you should:

Leave the service line valve open.

Remove the relay valves.

Close the emergency line valve.

Before a trip, you should ensure that air reaches all air brakes on all trailers by opening up the rear emergency line and service line shut-off valves and listening for escaping air. Close both shut-off valves before beginning to drive.

16. To prevent a rollover, cargo should be:

Loaded with most weight on the driver’s side of the trailer.

Placed near the rear of the trailer.

Spread out in the trailer.

Cargo weight should be evenly distributed within a trailer to reduce the risk of a rollover. Do not place too much weight on one side of a trailer.

17. When backing a trailer, you must first turn the steering wheel:

In the direction you want the trailer to go.

In the direction opposite of where you want the trailer to go.

To the left.

When backing a vehicle without a trailer, a driver must turn the vehicle in the direction that they want to go. However, when backing with a trailer, the driver must begin by turning in the opposite direction. Once the trailer starts to turn, they should turn the wheel in the other direction to follow the trailer.

18. If your vehicle gets stuck on railroad tracks, you should:

Sit in the cab and call for help.

Exit the cab and walk away from the tracks.

Motion for another driver to push your vehicle.

If your vehicle gets stuck on railroad tracks for any reason, you should immediately exit the vehicle and walk away from the tracks. Contact the proper emergency authorities.

19. Operating a combination vehicle usually requires ____ operating a single vehicle.

Less skill than

About the same level of skill as

More skill than

Exactly the same level of skill as

Combination vehicles require more skill to drive than single vehicles. Combination vehicles are usually longer and heavier, and are more vulnerable to rollovers.

20. How many air lines does a combination vehicle have?

One

Two

Three

Four

Every combination vehicle has two air lines: the service line and the emergency line.

Grade This Section

See the exact questions that will be on the 2024 Arkansas DMV exam.

99.2% of people who use the cheat sheet pass the FIRST TIME

Alexa shares with us how she went in for her Class A permit and decided to get her Hazmat endorsement as a bonus!

Mark shares his feedback on his Class A CDL Cheat Sheet

Click Here
Full Cheat Sheet Unlock Your Exclusive Cheat Sheet!