Instructions

2025 Vermont Motorcycle Permit Test 11

The following questions are from real DMV written motorcycle permit tests. These are some of the actual permit questions you will face in Vermont when getting your motorcycle learners.. Read More

The following questions are from real DMV written motorcycle permit tests. These are some of the actual permit questions you will face in Vermont when getting your motorcycle learners permit. Each motorcycle theory practice test question has three answer choices. Select one answer for each question and select "grade this section." You can find this button at the bottom of the drivers license quiz. For a complete list of questions and answers for Vermont please visit https://cheat-sheets.dmv-written-test.com/en/vermont/motorcycle.

Number of Tests 16

Number of Question 25

Passing Score 20

1. If your front tire goes flat while you are riding:

The steering will feel heavy.

The steering will feel loose.

There will be no change in the steering.

The ride will feel too smooth.

If the front tire of a motorcycle fails, it will cause the steering to feel heavy. If your steering feels heavy, immediately exit the road and inspect your tires.

2. Reflective material on your helmet:

Helps you to be seen.

Is not allowed.

Should only be used at night.

Does not help you to be seen.

Reflective material on a vest or on the sides of your helmet can make you more visible to other drivers and should be used both day and night.

3. If your motorcycle starts to wobble, you should:

Gradually brake.

Accelerate.

Grip the handlebars firmly and close the throttle gradually.

Downshift.

Do not try to accelerate out of a wobble because doing so will only make the motorcycle more unstable. Instead, grip the handlebars firmly, slow down by gradually closing the throttle, move your weight as far forward and downward as possible, and pull off the road as soon as you can. Avoid applying the brakes, as this may also worsen the wobble.

4. When securing a load, you should place the load:

As high as possible.

As low as possible.

On a sissy bar.

Only on one side of the motorcycle.

Secured loads should be low. Putting them too high up, such as on a sissy bar, can raise the motorcycle's center of gravity and upset its balance. Loads should be as evenly distributed as possible on each side of the motorcycle to avoid pulling the bike to one side.

5. Drivers on an entrance ramp may not see you on the highway. What should you do to help an entering driver merge safely?

Stay in your lane, as it is not your responsibility to be seen.

Change to a lane away from the entrance ramp, if possible.

Move to the shoulder.

Weave within your lane to be more obvious to the entering driver.

To reduce the risk of a collision, always allow merging vehicles plenty of space to safely enter traffic. Change lanes away from the entrance ramp if there is room to do so safely. If there isn't another lane available, adjust your speed to open up space for the merging driver.

6. Before riding, check all of the following, except:

Your tires' inflation pressure.

The amount of tread on your tires.

The reflective quality of your tires.

The general condition of the sidewalls on your tires.

Before every ride, be sure to check your tires' inflation pressure, your tires' treadwear, and the general condition of the sidewalls and tread surface on the tires.

Grade This Section

See the exact questions that will be on the 2025 Vermont DMV exam.

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet Unlock Your Exclusive Cheat Sheet!

Choose your Type

Choose your State

Choose your Test