Bus

This endorsement is required for driving a school bus. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice.. Read More

This endorsement is required for driving a school bus. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. To pass, the applicant must answer at least 16 questions correctly. Each question has two, three or four possible answer choices. Test questions come from the Utah Commercial Driver License Handbook. Questions come from chapters covering School Buses, Pre-Trip Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-Road Driving. The School Bus endorsement can be used with the Class A, B or C CDL.

Number of Question
Passing Score

15. If you must back up at a student pick-up point, you should:

Explanation
If you must back up a school bus at a student pick-up point, do not put the bus in reverse until all students have boarded. Watch for late-comers at all times.

16. If you must back up at a student pick-up point, you should:

Explanation
If you must back up a school bus at a student pick-up point, be sure to pick up all students before you begin backing up. When backing, it is especially important to keep an eye out for latecomers.

17. During the on-road driving test, you should:

Explanation
During the on-road driving test, you must listen to and follow the directions given by the examiner. They will never ask you to drive in an unsafe manner.

18. When students are boarding a school bus, the driver should do all of the following, except:

Explanation
Students should always board a school bus in a single-file line.

19. Crossover mirrors help the driver see:

Explanation
Crossover mirrors are used to help a driver see the danger zone area directly in front of a school bus. The mirrors should also display the danger zone areas to the left and right sides of the bus, including the area from the front of the bus to the service door.

20. When taking the on-road driving test, you must do all of the following, except:

Explanation
During the on-road driving test, you must drive in a safe and responsible manner; wear your safety belt; obey all traffic signs, signals, and laws; and complete the test without any accidents or moving violations.

Frequently Asked Questions

To obtain a CDL Bus endorsement in Utah, follow these steps:

1. Obtain a Utah Commercial Driver's License (CDL): To obtain a CDL, you must pass a written knowledge test and a road skills test. You must also meet other requirements, such as being at least 18 years old (or 21 years old if you plan to drive across state lines) and having a clean driving record.

2. Meet the Medical Requirements: You must meet the medical requirements set by the Department of Transportation (DOT) to obtain a CDL Bus endorsement. This includes passing a medical examination and obtaining a medical certificate.

3. Study for the Bus Endorsement Test: You will need to study for and pass the CDL Bus endorsement test. This test covers topics such as passenger safety, loading and unloading passengers, and emergency procedures.

4. Schedule and Pass the Bus Endorsement Test: Schedule an appointment with your local DMV office to take the CDL Bus endorsement test. You will need to bring your current CDL license, proof of insurance, and payment for any applicable fees.

5. Obtain Your CDL Bus Endorsement: If you pass the CDL Bus endorsement test, you will receive your CDL with the Bus endorsement added.

It is important to note that obtaining a CDL Bus endorsement requires additional training beyond standard CDL training. Be sure to seek out appropriate training programs before attempting to obtain this endorsement.

To obtain a CDL Bus license in Utah, you must meet the following requirements:

1. Age: You must be at least 18 years old to obtain a CDL Bus license in Utah. However, you will only be able to drive within the state of Utah and cannot transport hazardous materials or operate double/triple trailers until you turn 21 years old.

2. Valid Driver's License: You must hold a valid driver's license in the state of Utah.

3. Medical Certification: You must pass a medical examination and obtain a medical certificate from a certified medical examiner to prove that you are physically capable of operating a commercial vehicle.

4. CDL Knowledge Tests: You must pass the written knowledge tests for the CDL license and for the Passenger endorsement test.

5. Skills Test: You must successfully complete a skills test, which includes a pre-trip inspection, basic vehicle control, and an on-road driving test.

6. Background Check: You will be required to pass a background check prior to obtaining your CDL Bus license.

7. Training: You are not required to complete formal training to obtain your CDL Bus license in Utah, but it is highly recommended that you do so.

It's important to note that obtaining a CDL Bus license requires additional training beyond standard CDL training. Be sure to seek out appropriate training programs before attempting to obtain this type of license.

Yes, you may need specific experience or training to obtain a CDL Bus endorsement in Utah.

While Utah does not require formal training to obtain a CDL Bus endorsement, it is highly recommended that you undergo specialized training in passenger vehicle operation and safety. This is especially important if you have not previously operated a bus or other passenger vehicle.

Many commercial driving schools offer specialized training programs for bus drivers, which can help you develop the skills and knowledge you need to operate a bus safely. These programs typically cover topics such as passenger loading and unloading, managing passenger behavior, emergency procedures, and other specialized skills required for bus operation.

In addition to specialized training, you may also need to meet certain experience requirements to obtain a CDL Bus endorsement. For example, some employers may require that you have a certain number of hours of experience driving a bus before they will consider hiring you.

If you are unsure about the specific requirements for obtaining a CDL Bus endorsement in Utah, it is recommended that you contact the Utah Department of Public Safety - Driver License Division or a commercial driving school for guidance and more information.

Yes, there are different classes or types of CDL Bus licenses in Utah. The type of license you need will depend on the type of bus you plan to operate and the number of passengers you plan to transport.

The following are the different classes or types of CDL Bus licenses in Utah:

1. Class B CDL with Passenger (P) endorsement: This license allows you to operate a single vehicle with a GVWR of 26,001 pounds or more, or any such vehicle towing a trailer with a GVWR not exceeding 10,000 pounds. This license also allows you to transport 16 or more passengers.

2. Class B CDL with Passenger (P) and School Bus (S) endorsements: This license allows you to operate a single vehicle with a GVWR of 26,001 pounds or more, or any such vehicle towing a trailer with a GVWR not exceeding 10,000 pounds. This license also allows you to transport 16 or more passengers and operate a school bus.

3. Class A CDL with Passenger (P) endorsement: This license allows you to operate a combination of vehicles, such as a tractor-trailer combination, with a GCWR of 26,001 pounds or more. This license also allows you to transport 16 or more passengers.

4. Class A CDL with Passenger (P) and School Bus (S) endorsements: This license allows you to operate a combination of vehicles, such as a tractor-trailer combination, with a GCWR of 26,001 pounds or more. This license also allows you to transport 16 or more passengers and operate a school bus.

It's important to note that each type of CDL Bus license has its own specific requirements for testing and endorsements. Be sure to check with the Utah Department of Public Safety - Driver License Division for specific details on the requirements for each type of CDL Bus license.

No, you cannot use your personal vehicle for the CDL Bus driving test in Utah.

According to the Utah Department of Public Safety - Driver License Division, you must bring a vehicle that meets the requirements for the specific class of CDL Bus license you are testing for. The vehicle must be in safe and proper working condition and must be equipped with all necessary safety equipment, such as mirrors, lights, and brakes.

For the CDL Bus driving test, you will typically be required to demonstrate your ability to perform a pre-trip inspection, basic control skills, and on-road driving skills. It is important that you are familiar with the vehicle you will be using for the test and have experience operating a bus or other large commercial vehicle.

If you do not have access to a suitable vehicle for the CDL Bus driving test, you may be able to rent or borrow one from a commercial driving school or other training provider. Be sure to check with the Utah Department of Public Safety - Driver License Division for specific requirements and restrictions on using a rented or borrowed vehicle for testing purposes.

Yes, there are specific skills and maneuvers you will need to demonstrate during the CDL Bus driving test in Utah. The test will typically consist of three parts: a pre-trip inspection, basic control skills, and on-road driving skills.

During the basic control skills portion of the test, you will be required to perform a series of maneuvers that demonstrate your ability to control the bus in tight spaces and under varying conditions. These maneuvers may include:

1. Straight line backing: You will be required to back the bus in a straight line for a distance of at least 50 feet.

2. Offset backing: You will be required to back the bus into a space that is offset to the left or right of your starting position.

3. Parallel parking: You will be required to parallel park the bus between two cones or barriers that simulate parked vehicles.

4. Alley dock: You will be required to back the bus into a space that is bordered by cones or barriers on both sides, simulating an alleyway.

During the on-road driving skills portion of the test, you will be required to demonstrate your ability to safely operate the bus on public roads and highways. You may be asked to perform a variety of tasks, such as turning, merging, changing lanes, stopping, and starting.

It is important to note that specific requirements for the CDL Bus driving test may vary depending on the class of license you are testing for. Be sure to check with the Utah Department of Public Safety - Driver License Division for specific details on the requirements for your particular license class.

Yes, there are additional medical and physical requirements for obtaining a CDL Bus endorsement in Utah.

To qualify for a CDL Bus endorsement, you must meet the same general medical requirements as all other CDL applicants. This includes passing a medical examination and providing proof of good health and physical fitness.

In addition, if you are applying for a passenger endorsement, you will be required to meet additional medical requirements. This may include passing a Department of Transportation (DOT) medical examination and providing proof of good health and physical fitness. The DOT medical examination may include vision and hearing tests, as well as assessments of your cardiovascular health, respiratory function, and other medical conditions.

Furthermore, if you are operating a bus with air brakes, you will be required to pass an air brake knowledge test and demonstrate your ability to operate a vehicle with air brakes during the skills test.

It is important to note that these requirements may vary depending on the specific class of CDL Bus endorsement you are seeking. Be sure to check with the Utah Department of Public Safety - Driver License Division for specific details on the requirements for your particular license class.

In Utah, it is illegal to transport passengers for hire without a valid CDL Bus endorsement. A CDL Bus endorsement is required for anyone who operates a commercial motor vehicle (CMV) designed to transport 16 or more passengers, including the driver.

This requirement applies regardless of whether you are transporting passengers across state lines or within Utah. If you are caught operating a CMV without the proper CDL Bus endorsement, you may face fines and other penalties.

It is important to note that there are some limited exceptions to this requirement. For example, you may be exempt from the CDL requirement if you are operating a vehicle that is owned or leased by a government agency or a nonprofit organization and is used exclusively for the transportation of employees or volunteers.

However, in most cases, a CDL Bus endorsement is required to legally operate a bus or other passenger-carrying vehicle for hire in Utah.

You can add the CDL Bus endorsement to your existing CDL license in Utah. To do this, you will need to pass the knowledge and skills tests required for the endorsement.

Here is the process to add the CDL Bus endorsement to your existing CDL license:

1. Study for the CDL Bus endorsement knowledge test. You can find study materials on the Utah Department of Public Safety - Driver License Division website.

2. Schedule and pass the CDL Bus endorsement knowledge test at a testing location.

3. Schedule and complete a skills test in a vehicle that requires a CDL Bus endorsement.

4. Pay the appropriate fees.

Once you have passed both tests and paid the fees, the Utah Department of Public Safety - Driver License Division will add the CDL Bus endorsement to your existing CDL license.

It is important to note that if you are adding a passenger endorsement, you may also be required to complete additional training and meet additional medical requirements. Be sure to check with the Utah Department of Public Safety - Driver License Division for specific details on the requirements for your particular license class.

Yes, there are certain restrictions and limitations for drivers with a CDL Bus endorsement in Utah. Here are some of the key restrictions and limitations to be aware of:

1. Passenger limits: Drivers with a CDL Bus endorsement are limited in the number of passengers they can transport. A driver cannot transport more passengers than the number of seats on the bus.

2. Endorsement restrictions: Depending on the specific type of endorsement you have, there may be additional restrictions or requirements. For example, if you have a School Bus endorsement, you may be required to undergo additional training and meet certain medical requirements.

3. Hours of service: CDL Bus drivers are subject to the hours-of-service regulations set by the Federal Motor Carrier Safety Administration (FMCSA). These regulations limit the number of hours a driver can operate a commercial motor vehicle in a given day and week.

4. Drug and alcohol testing: CDL Bus drivers are also subject to drug and alcohol testing requirements under federal law. Drivers must pass pre-employment testing and may be subject to random testing throughout their employment.

It is important for CDL Bus drivers to be aware of these restrictions and limitations, as violating any of these rules could result in fines, suspension or revocation of your CDL license, or even criminal charges in some cases.
DMV Writen Test