Knowledge Test Class A
This license is required for driving any legal combination of vehicles,with a gross combination weight rating of 26,001 pounds or more, provided the GVWR of a trailer exceeds 10,000 pounds. To receive this license, applicants must pass a 70-question test. Test questions come from the Texas Commercial Motor Vehicle Drivers Handbook. Each question has four answer choices. To pass, applicants must answer 56 questions correctly. Test questions come from the Texas Commercial Motor Vehicle Drivers Handbook. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Combination Vehicles, Pre-Trip Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-Road Driving. Endorsemetns that may be used with a Class A CDL are: Hazardous materials, Tank, Passenger, Doubles/Triples, HazMat and Tank, Air Brakes and School bus.
Number of Question
Passing Score
36. When inspecting underneath your vehicle for leaking fluids, you must look for all the following, except:
Explanation
When approaching your vehicle before a trip, be sure to look underneath the vehicle for fresh oil, coolant, grease, or fuel leaks.
37. When taking the basic vehicle control skills test:
Explanation
During the basic vehicle control skills test, there is no penalty for an initial pull-up; however, an excessive number of pull-ups will count as errors.
38. When approaching your vehicle, you should ensure that:
Explanation
When approaching your vehicle before an inspection, make note of its general condition and ensure that it is not damaged or leaning. Look under the vehicle for fresh leaks. Check around the vehicle for hazards to movement, such as people, other vehicles, or low-hanging wires or tree limbs.
39. What is sleep debt?
Explanation
You can build up a "debt" of sleep if you do not sleep for adequate amounts of time. You can only catch up on the time that you "owe" by getting more sleep.
40. When it is difficult for others to see your vehicle, such as at dawn or dusk, you can help other drivers by:
Explanation
At times when visibility is low, you should turn your headlights on to the low beam setting. If you are having a difficult time seeing others, they are probably having a difficult time seeing you.
41. Which of the following is not a crime that would disqualify an applicant from a hazardous materials endorsement?
Explanation
There are a number of crimes that will disqualify a person from receiving a hazardous materials endorsement for seven years. Among these offenses are arson, robbery, and crimes of dishonesty, fraud, or misrepresentation. More serious crimes, such as murder, result in a lifetime disqualification.
42. On a truck with air brakes, the braking system’s air compressor:
Explanation
In an air brake system, the air compressor pumps air into the air storage tanks. The air compressor is controlled by the air compressor governor.
Frequently Asked Questions
A Class A CDL (Commercial Driver's License) is a type of license required to operate the heaviest and largest commercial vehicles in Texas. It allows drivers to operate combination vehicles with a total weight of 26,001 pounds or more, including a towed vehicle that weighs more than 10,000 pounds. This license is necessary for drivers who want to operate semi-trucks, tractor-trailers, and other heavy-duty commercial vehicles.
To obtain a Class A CDL in Texas, drivers must first pass a written knowledge test and then a skills test. They must also meet certain medical and physical requirements and provide documentation of their driving history. Once they pass these tests and meet the requirements, they can apply for a Class A CDL license through the Texas Department of Public Safety.
To obtain a Class A CDL in Texas, drivers must first pass a written knowledge test and then a skills test. They must also meet certain medical and physical requirements and provide documentation of their driving history. Once they pass these tests and meet the requirements, they can apply for a Class A CDL license through the Texas Department of Public Safety.
With a Class A CDL license in Texas, you can operate combination vehicles that have a total weight of 26,001 pounds or more, including the weight of a towed vehicle that weighs more than 10,000 pounds. This includes:
1. Tractor-trailers: A combination of a tractor unit and one or more semi-trailers.
2. Double and triple trailers: A combination of two or three trailers connected to a single tractor unit.
3. Tanker vehicles: Vehicles designed to transport liquids or gases in bulk.
4. Livestock carriers: Vehicles designed to transport live animals.
5. Flatbed trucks: Trucks with an open cargo area that is typically used for transporting large items such as building materials and heavy equipment.
It's important to note that drivers with a Class A CDL license may also be required to obtain additional endorsements if they plan on operating vehicles that require specialized knowledge and skills, such as hazardous materials (Hazmat) or passenger vehicles.
1. Tractor-trailers: A combination of a tractor unit and one or more semi-trailers.
2. Double and triple trailers: A combination of two or three trailers connected to a single tractor unit.
3. Tanker vehicles: Vehicles designed to transport liquids or gases in bulk.
4. Livestock carriers: Vehicles designed to transport live animals.
5. Flatbed trucks: Trucks with an open cargo area that is typically used for transporting large items such as building materials and heavy equipment.
It's important to note that drivers with a Class A CDL license may also be required to obtain additional endorsements if they plan on operating vehicles that require specialized knowledge and skills, such as hazardous materials (Hazmat) or passenger vehicles.
To obtain a Class A CDL license in Texas, you must meet the following requirements:
1. Be at least 18 years old: You must be at least 18 years old to drive intrastate (within Texas) and at least 21 years old to drive interstate (across state lines).
2. Hold a valid driver's license: You must have a valid driver's license in the state of Texas.
3. Pass a medical exam: You must pass a medical exam and provide a medical examiner's certificate that shows you meet the federal medical requirements for commercial drivers.
4. Pass a written knowledge test: You must pass a written knowledge test that covers general commercial driving topics and specific knowledge related to operating Class A vehicles.
5. Obtain a learner's permit: You must obtain a Class A CDL learner's permit before you can take the skills test.
6. Practice driving with a qualified CDL holder: You must practice driving with a qualified CDL holder who has held their license for at least one year in the same class of vehicle you are seeking to operate.
7. Pass a skills test: You must pass a skills test that includes a pre-trip inspection, basic vehicle control, and on-road driving.
After meeting these requirements, you can apply for your Class A CDL license through the Texas Department of Public Safety.
1. Be at least 18 years old: You must be at least 18 years old to drive intrastate (within Texas) and at least 21 years old to drive interstate (across state lines).
2. Hold a valid driver's license: You must have a valid driver's license in the state of Texas.
3. Pass a medical exam: You must pass a medical exam and provide a medical examiner's certificate that shows you meet the federal medical requirements for commercial drivers.
4. Pass a written knowledge test: You must pass a written knowledge test that covers general commercial driving topics and specific knowledge related to operating Class A vehicles.
5. Obtain a learner's permit: You must obtain a Class A CDL learner's permit before you can take the skills test.
6. Practice driving with a qualified CDL holder: You must practice driving with a qualified CDL holder who has held their license for at least one year in the same class of vehicle you are seeking to operate.
7. Pass a skills test: You must pass a skills test that includes a pre-trip inspection, basic vehicle control, and on-road driving.
After meeting these requirements, you can apply for your Class A CDL license through the Texas Department of Public Safety.
In Texas, the minimum age requirement for a Class A CDL license is 18 years old. However, if you plan on driving across state lines, you must be at least 21 years old to comply with federal regulations. Additionally, drivers who are under the age of 21 are prohibited from transporting hazardous materials and driving commercial motor vehicles (CMVs) across state lines.
Yes, depending on the type of cargo you plan on transporting, you may need additional endorsements on your Class A CDL license. The most common endorsements for a Class A CDL license are:
1. H (Hazardous materials): This endorsement is required if you plan on transporting materials that are considered hazardous by the Department of Transportation.
2. N (Tanker): This endorsement is required if you plan on transporting liquids or gases in bulk containers that are over 119 gallons.
3. P (Passenger): This endorsement is required if you plan on driving a vehicle designed to transport 16 or more passengers, including the driver.
4. T (Double/triple trailers): This endorsement is required if you plan on driving a combination of two or three trailers.
To obtain any of these endorsements, you must pass an additional knowledge test that covers the specific requirements for each endorsement. Additionally, some endorsements may require additional background checks or fingerprinting. It's important to check with your state's Department of Motor Vehicles to determine which endorsements are required for your specific driving situation.
1. H (Hazardous materials): This endorsement is required if you plan on transporting materials that are considered hazardous by the Department of Transportation.
2. N (Tanker): This endorsement is required if you plan on transporting liquids or gases in bulk containers that are over 119 gallons.
3. P (Passenger): This endorsement is required if you plan on driving a vehicle designed to transport 16 or more passengers, including the driver.
4. T (Double/triple trailers): This endorsement is required if you plan on driving a combination of two or three trailers.
To obtain any of these endorsements, you must pass an additional knowledge test that covers the specific requirements for each endorsement. Additionally, some endorsements may require additional background checks or fingerprinting. It's important to check with your state's Department of Motor Vehicles to determine which endorsements are required for your specific driving situation.
The Class A CDL skills test consists of three parts:
1. Pre-trip inspection: This is a thorough inspection of the vehicle that you will be driving. You will need to show that you can identify and explain the function of various parts of the vehicle, check for any defects or safety issues, and ensure that the vehicle is safe to drive.
2. Basic controls: In this part, you will demonstrate your ability to control the vehicle in a controlled environment. You will be asked to perform maneuvers such as straight-line backing, offset backing, and parallel parking.
3. Road test: In this part, you will demonstrate your ability to drive the vehicle safely on public roads. You will need to show that you can follow traffic laws, make turns safely, change lanes, and negotiate intersections.
The entire skills test must be completed in a vehicle that matches the type of commercial vehicle you plan to operate. This means if you plan to operate a truck with air brakes, you must complete the skills test in a truck with air brakes.
It's important to note that the skills test is only one part of obtaining a Class A CDL license. You must also pass a written knowledge test and meet other state requirements before you can be issued a CDL license.
1. Pre-trip inspection: This is a thorough inspection of the vehicle that you will be driving. You will need to show that you can identify and explain the function of various parts of the vehicle, check for any defects or safety issues, and ensure that the vehicle is safe to drive.
2. Basic controls: In this part, you will demonstrate your ability to control the vehicle in a controlled environment. You will be asked to perform maneuvers such as straight-line backing, offset backing, and parallel parking.
3. Road test: In this part, you will demonstrate your ability to drive the vehicle safely on public roads. You will need to show that you can follow traffic laws, make turns safely, change lanes, and negotiate intersections.
The entire skills test must be completed in a vehicle that matches the type of commercial vehicle you plan to operate. This means if you plan to operate a truck with air brakes, you must complete the skills test in a truck with air brakes.
It's important to note that the skills test is only one part of obtaining a Class A CDL license. You must also pass a written knowledge test and meet other state requirements before you can be issued a CDL license.
Yes, drivers with a Class A CDL license may have restrictions or limitations on their driving privileges. Some common restrictions/limitations include:
1. Air brake restriction: This restriction is placed on drivers who have not passed the air brake knowledge test or who did not complete the skills test in a vehicle with air brakes. Drivers with this restriction are not allowed to operate vehicles with air brakes.
2. L (No air brake equipped CMV): This restriction is placed on drivers who take the CDL skills test in a vehicle without air brakes. This means that the driver is only qualified to operate commercial vehicles without air brakes.
3. E (No manual transmission equipped CMV): This restriction is placed on drivers who take the CDL skills test in a vehicle with an automatic transmission. This means that the driver is only qualified to operate commercial vehicles with automatic transmissions.
4. K (Intrastate only): This restriction is placed on drivers who only plan to operate commercial vehicles within their state of residence.
5. P (Passenger vehicle): This restriction is placed on drivers who only plan to operate vehicles designed to transport passengers, such as buses or vans.
It's important to note that these restrictions/limitations may vary by state, and some states may impose additional restrictions beyond those listed above. Drivers should check with their state's Department of Motor Vehicles to determine what restrictions/limitations apply to their specific situation.
1. Air brake restriction: This restriction is placed on drivers who have not passed the air brake knowledge test or who did not complete the skills test in a vehicle with air brakes. Drivers with this restriction are not allowed to operate vehicles with air brakes.
2. L (No air brake equipped CMV): This restriction is placed on drivers who take the CDL skills test in a vehicle without air brakes. This means that the driver is only qualified to operate commercial vehicles without air brakes.
3. E (No manual transmission equipped CMV): This restriction is placed on drivers who take the CDL skills test in a vehicle with an automatic transmission. This means that the driver is only qualified to operate commercial vehicles with automatic transmissions.
4. K (Intrastate only): This restriction is placed on drivers who only plan to operate commercial vehicles within their state of residence.
5. P (Passenger vehicle): This restriction is placed on drivers who only plan to operate vehicles designed to transport passengers, such as buses or vans.
It's important to note that these restrictions/limitations may vary by state, and some states may impose additional restrictions beyond those listed above. Drivers should check with their state's Department of Motor Vehicles to determine what restrictions/limitations apply to their specific situation.
The Class A CDL written test is administered in English in most states, including Texas. However, some states may offer the test in other languages, such as Spanish. It's important to check with your state's Department of Motor Vehicles to determine if the test is available in a language other than English.
If the test is not available in your preferred language, you may be able to bring an interpreter with you to the testing center. However, the interpreter must be approved by the testing center and must not be a family member or friend. The interpreter must also sign a statement agreeing to maintain confidentiality and impartiality during the testing process.
It's also important to note that even if you take the written test in a language other than English, you will still need to demonstrate your ability to read and understand English for the CDL skills test and for operating a commercial vehicle on public roads.
If the test is not available in your preferred language, you may be able to bring an interpreter with you to the testing center. However, the interpreter must be approved by the testing center and must not be a family member or friend. The interpreter must also sign a statement agreeing to maintain confidentiality and impartiality during the testing process.
It's also important to note that even if you take the written test in a language other than English, you will still need to demonstrate your ability to read and understand English for the CDL skills test and for operating a commercial vehicle on public roads.
Yes, if you have a disability that affects your ability to take the Class A CDL written test, you may request accommodations from your state's Department of Motor Vehicles. Accommodations may include additional time to complete the test, a separate testing room, or the use of assistive technology, such as screen readers or magnifiers.
To request accommodations, you will need to provide documentation of your disability and how it impacts your ability to take the test. This documentation may include a note from your doctor or a letter from a qualified professional who has evaluated your disability.
It's important to note that the process for requesting accommodations may vary by state. You should contact your state's Department of Motor Vehicles for more information on how to request accommodations for the Class A CDL written test.
To request accommodations, you will need to provide documentation of your disability and how it impacts your ability to take the test. This documentation may include a note from your doctor or a letter from a qualified professional who has evaluated your disability.
It's important to note that the process for requesting accommodations may vary by state. You should contact your state's Department of Motor Vehicles for more information on how to request accommodations for the Class A CDL written test.
If you fail the Class A CDL written test in Texas, you are allowed to retake it. However, there may be a waiting period before you can retake the test. In Texas, you are required to wait at least one day before retaking the test.
If you fail the test multiple times, there may be additional waiting periods before you can retake it again. It's important to note that you may be required to pay a fee each time you retake the test.
It's also important to use your time wisely between attempts. Review the areas where you struggled and study the materials provided by your state's Department of Motor Vehicles. You may also want to consider taking a CDL practice test to help identify areas where you need additional study.
Remember, passing the written test is just one step in obtaining a Class A CDL. You will also need to pass a skills test and meet other requirements, such as providing a valid medical certificate and passing a background check.
If you fail the test multiple times, there may be additional waiting periods before you can retake it again. It's important to note that you may be required to pay a fee each time you retake the test.
It's also important to use your time wisely between attempts. Review the areas where you struggled and study the materials provided by your state's Department of Motor Vehicles. You may also want to consider taking a CDL practice test to help identify areas where you need additional study.
Remember, passing the written test is just one step in obtaining a Class A CDL. You will also need to pass a skills test and meet other requirements, such as providing a valid medical certificate and passing a background check.
