Mississippi Motorcycle Permit Test

Oily drippings from cars collect in a strip in the center of a traffic lane. Unless the road is wet, this area will generally still provide enough traction for motorcyclists to ride safely. Because the strip is usually no more than two feet wide, it is often possible to ride to one side of the strip and still be in the center portion of the lane.

The best way to deal with a tailgater is to get them in front of you. If you can do so safely, change lanes and let them pass. Increasing your speed may only encourage the driver to tailgate you at a higher speed.

Blind spots, by definition, are areas that you cannot see by just looking in your mirrors. Turn your head to the side and check over your shoulder for vehicles in your blind spot before you change lanes.

When riding on slippery surfaces, you should use both brakes to slow down. Squeeze the brake lever gradually to avoid locking the front wheel and use gentle pressure on the rear brake.

Even if your passenger is also a motorcyclist, you should give them complete safety instructions before leaving on a trip. Ask them to get on the motorcycle only after you have started the engine. They should sit as far forward as possible without crowding you and firmly hold onto your waist, hips, or belt. They should keep both feet on the footrests at all times, even when the bike is stopped.

There is no one lane position that is always best, nor one that should always be avoided. Change your lane position as necessary based on changing road and traffic conditions.