Indiana CDL Permit Test - Class A

Number of questions: 50
Passing score: 40
Directions: This license is required for driving any legal combination of vehicles, with a gross combination weight rating of 26,001 pounds or more, provided the GVWR of a trailer exceeds 10,000 pounds. To receive this license, applicants must pass a 50-question test. Test questions come from the Indiana Commercial Driver License Manual. To pass, applicants must answer 40 questions correctly. Each question has four possible answer choices. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Combination Vehicles, Pre-Trip Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-Road Driving. Endorsements that may be used with a Class A CDL are: Hazardous materials, Tank, Passenger, Doubles/Triples, HazMat, Tank, Air Brakes and School bus.
You have made error so far
Passing grade —
10 or fewer errors
advertising
1.
How can a person check for a leak in hydraulic brakes?
Pump the brake pedal three times and hold the pedal for five seconds. If the pedal moves, there may be a problem
Push the brake pedal down as far as you can and let go. If the brake pedal returns to its normal position, there may be a problem
Push the brake pedal down as far as possible and then let go. If the brake makes a squeak, there may be a problem
Remove the rear wheel and listen for a noise when the brake pedal is depressed
2.
If an aggressive driver confronts you, what should you not do?
Make eye contact
Ignore gestures
Do not challenge them by racing
Try to get out of their way
3.
For safety purposes, when should you turn the retarder off?
When it is slippery outside
When you have a passenger
If the load is heavy
In heavier traffic
4.
Using ABS:
Shortens stopping distance
Shortens brake response time
Provides less control
Provides more control
5.
Which is the slipperiest?
Ice that is dry
Ice that is wet
Wet pavement
Dry pavement
6.
If equipped with hydraulic brakes, how can the brakes be checked?
Pump the brake three times and apply firm pressure for five seconds to the brake pedal. The brak pedal should not move
Pump the brakes three times and apply firm pressure for five seconds to the brake pedal. The brake pedal should slowly move toward the floor
Pump the brakes three times and apply firm pressure for five seconds to the brake pedal. The brake pedal should slowly rise
Pump the brakes three times and apply firm pressure for five seconds to the brake pedal. THe brake pedal should be easy to push to the floor
7.
What is another name for service line?
Control line
Exchange line
Surplus line
Parallel line
advertising
Rate this test
3.7 out of 5
based on 15 votes
Our Latest Videos