Tank

This endorsement is required to haul any liquid or gaseous materials in a tank or tanks having a capacity of 1,000 gallons or more that is either permanently or temporarily attached to the vehicle or.. Read More

This endorsement is required to haul any liquid or gaseous materials in a tank or tanks having a capacity of 1,000 gallons or more that is either permanently or temporarily attached to the vehicle or chassis. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. Each question has three or four possible answer choices. To pass, the applicant must answer at least 16 questions correctly. Test questions come from the Connecticut Commercial Driver License Manual. Questions come from chapters covering: Driving Safely, Tank Vehicles, Hazardous Materials and Combination Vehicles. The Tank endorsement can be used with the Class A, B or C CDL.

Number of Question
Passing Score

8. If there is a fire in your vehicle, you should not:

Explanation
In the event of a vehicle fire, you should leave the road and stop in an open area. Do not pull into a service station as fuels at the service station could catch fire. Report the fire and your location to emergency services.

9. When driving in heavy traffic, you should:

Explanation
Areas with heavy traffic, road construction, large numbers of pedestrians, or severe weather demand extra attention from a driver. The driver should avoid all possible distractions while in such areas, including cell phone use.

10. Your engine runs a pump used during the delivery of compressed gas. After delivery, you should turn off the engine ____ unhooking the hoses.

Explanation
Unless your engine runs a pump for product transfer, turn it off when loading or unloading a compressed gas tank. If you do use your engine to run a pump, you should turn the engine off after the product transfer but before unhooking the hoses.

11. When inspecting your vehicle, which of the following should not cause concern?

Explanation
Problems to check for when inspecting a vehicle's exhaust system include loose, broken, or missing exhaust pipes, mufflers, tailpipes, or vertical stacks; loose, broken, or missing mounting brackets, clamps, bolts, or nuts; exhaust system parts rubbing against fuel system parts, tires, or other moving parts of the vehicle; and exhaust system parts that are leaking.

12. People working on a disabled vehicle:

Explanation
Be cautious when driving near people who are working on a disabled vehicle on the side of the road. They may be focused on the repair and not paying attention to nearby traffic.

13. What does a material’s hazard class reflect?

Explanation
A hazardous material will fall into one of nine hazard classes. The material's hazard class reflects its associated risks.

14. Which of the following is not a sign of bad brake drums or shoes?

Explanation
Potential problems to check for when inspecting brakes include cracked drums; shoes or pads with oil, grease, or brake fluid on them; and shoes that are missing, broken, or worn dangerously thin.

Frequently Asked Questions

Here are the steps to obtain a CDL Tank endorsement in Connecticut:

1. Obtain a valid Connecticut CDL: You must have a valid Connecticut Commercial Driver’s License (CDL) before applying for a Tank endorsement. You can obtain a CDL by passing the required knowledge and skills tests.

2. Study the Tanker section of the Connecticut CDL Manual: You will need to study the Tanker section of the Connecticut CDL Manual thoroughly to prepare for the Tanker endorsement knowledge test.

3. Schedule and pass the Tanker endorsement knowledge test: You will need to pass a written knowledge test related to tanker vehicles and their operation. You can schedule and take this test at any Connecticut DMV office.

4. Obtain a Tanker vehicle for your road test: You will need access to a tanker vehicle that you can use for your road test. Make sure that the vehicle meets the Connecticut DMV’s requirements for a tanker vehicle.

5. Schedule and pass the Tanker endorsement road test: You will need to pass a road test that includes driving a tanker vehicle safely and properly. You can schedule and take this test at any Connecticut DMV office.

6. Pay the fee: Once you pass both tests, you will need to pay the required fee for your new Tanker endorsement. The fee is currently $5 per year, so it will cost $20 for a four-year endorsement.

Note that if you are applying for multiple endorsements at once, you may be able to save money on fees by applying for them all at once rather than separately.

To obtain a CDL Tank license (or a Tanker endorsement), you must meet the following requirements:

1. Be at least 21 years old: You must be at least 21 years old to operate a tanker vehicle across state lines or transport hazardous materials.

2. Have a valid CDL: You must already have a valid Commercial Driver's License (CDL) or be applying for one at the same time.

3. Pass a Tanker endorsement knowledge test: You must pass a written knowledge test related to tanker vehicles and their operation. The test covers topics such as identifying different types of tankers, handling cargo surge, and managing liquid weights and volumes.

4. Pass a Tanker endorsement road test: You must pass a road test that includes driving a tanker vehicle safely and properly. This includes skills such as loading and unloading cargo, turning, braking, and backing up.

5. Meet medical requirements: You must meet the medical requirements for commercial drivers, including passing a physical exam and carrying a valid Medical Examiner's Certificate.

6. No disqualifying criminal record: You cannot have any disqualifying criminal convictions that prevent you from obtaining a CDL or Tanker endorsement, such as drug-related offenses or felony convictions.

Note that there may be additional requirements or restrictions in Connecticut or in specific industries that use tanker vehicles, such as the transportation of hazardous materials. It is important to carefully review all state and federal requirements before applying for a CDL Tank license.

While there are no specific training requirements to obtain a CDL Tank endorsement in Connecticut, it is highly recommended that you receive specialized training before operating a tanker vehicle. Tanker vehicles can be more difficult to handle than other commercial vehicles due to their high center of gravity and the liquid cargo they carry, so it is important to have the skills and knowledge necessary to operate them safely.

Many truck driving schools offer specialized training programs for tanker vehicles, which can help you prepare for the Tanker endorsement knowledge and road tests. You may also be required to complete a hazardous materials (HazMat) training program if you plan to transport hazardous materials in your tanker vehicle.

In addition, some employers may require that you have prior experience driving a commercial vehicle or operating a tanker vehicle before they will hire you for a Tanker endorsement job. It is important to research the specific requirements and expectations of potential employers before pursuing a CDL Tank endorsement.

Yes, to obtain a CDL Tank endorsement, you will need to pass a written knowledge test specific to tanker vehicles. This test is in addition to the general knowledge test that all CDL applicants must pass. The Tanker endorsement knowledge test covers topics such as:

1. Identifying different types of tankers and their characteristics
2. Safe driving practices when operating a tanker vehicle
3. Recognizing and responding to cargo surge and sloshing
4. Understanding how to handle liquid weight and volume
5. Properly loading and unloading a tanker vehicle
6. Recognizing potential hazards when transporting hazardous materials

You may be able to find study materials or practice tests online or through your driving school to help you prepare for the Tanker endorsement knowledge test. It is important to study these materials thoroughly and ensure that you understand all the concepts before taking the test.

The CDL Tanker endorsement written test covers topics related to the safe operation of tanker vehicles and the transport of liquids or gases, including:

1. Tanker vehicle inspection: This includes checking the tank for leaks, cracks or any other damage that may affect the safe operation of the vehicle.

2. Safe driving practices: This includes controlling the vehicle's speed, braking, and acceleration, especially when carrying liquids or gases.

3. Cargo handling: This includes how to load and unload liquids or gases safely, how to prevent spills, and how to manage liquid surge.

4. Hazardous materials: This includes understanding and identifying hazardous materials, proper labeling, and emergency response procedures.

5. Tanker vehicle characteristics: This includes understanding the unique characteristics of tanker vehicles such as high center of gravity and liquid surges.

6. Special driving situations: This includes driving on steep inclines or declines, adverse weather conditions, and handling emergencies such as tire blowouts or brake failure.

It is important to study these topics thoroughly to pass the Tanker endorsement written test and become a safe and responsible tanker vehicle driver.

Yes, in addition to passing the written test, you will also need to demonstrate your ability to safely operate a tanker vehicle during the CDL Tank endorsement test. The skills and maneuvers you will be required to demonstrate include:

1. Pre-trip inspection: You will need to demonstrate your ability to properly inspect the tanker vehicle before operating it, including checking for leaks, cracks, and other issues that could affect its safe operation.

2. Backing: You may be asked to back the tanker vehicle into a loading dock or other tight space while demonstrating proper control and awareness of your surroundings.

3. Turning: You will need to demonstrate your ability to safely make turns with a tanker vehicle, which can be challenging due to its high center of gravity.

4. Acceleration and braking: You will need to demonstrate your ability to properly accelerate and brake the tanker vehicle while carrying liquids or gases.

5. Emergency maneuvers: You may be asked to demonstrate your ability to respond to emergency situations such as sudden stops or equipment failure.

6. Hazardous materials handling: If you are applying for a Tanker endorsement that allows you to transport hazardous materials, you may need to demonstrate your knowledge of proper handling procedures and emergency response protocols.

It is important to practice these skills and maneuvers before taking the Tanker endorsement test. You can do this by enrolling in a CDL training course or practicing with an experienced tanker vehicle driver.

Yes, there are some restrictions and limitations for drivers with a CDL Tank endorsement. These restrictions are designed to ensure the safe operation of tanker vehicles and the transport of liquids or gases. Here are some of the restrictions and limitations:

1. Endorsement type: The Tank endorsement is divided into two types, N (tank vehicles carrying liquids) and H (tank vehicles carrying hazardous materials). Drivers must have the appropriate endorsement based on the type of materials they will transport.

2. Weight limit: Tanker vehicles have weight limits that must be adhered to, depending on the type of vehicle and its cargo.

3. Special training: Drivers with a Tank endorsement must complete specialized training in the safe operation of tanker vehicles and the transport of liquids or gases.

4. Vehicle inspection: Tanker vehicles must be inspected before each trip to ensure that they are in proper working order and that their cargo is secure.

5. Hazardous materials handling: If a driver has an H endorsement, they must follow specific regulations for handling hazardous materials, including proper labeling, packaging, and emergency response procedures.

6. Route restrictions: Some states may have restrictions on the routes that tanker vehicles can take due to weight limits or other safety concerns.

It is important for drivers with a Tank endorsement to understand these restrictions and limitations to ensure that they operate their vehicles safely and in compliance with regulations.

No, you cannot transport liquid or gas materials without a CDL Tank endorsement if the vehicle you are operating meets the definition of a tanker vehicle.

A tanker vehicle is defined as a commercial motor vehicle designed to carry any liquid or gas in a tank or tanks, either permanently attached to or forming a part of the vehicle. If your vehicle meets this definition and you are transporting liquids or gases, you are required to have a Tank endorsement on your CDL.

This endorsement is required by the Federal Motor Carrier Safety Administration (FMCSA) and helps ensure that drivers are trained and qualified to safely operate tanker vehicles and transport liquid or gas materials. The endorsement requires additional testing and training beyond the standard CDL requirements.

If you are caught transporting liquids or gases in a tanker vehicle without the proper Tank endorsement, you could face fines, penalties, and even the loss of your CDL. It is important to ensure that you have the proper endorsements before operating any commercial motor vehicle.

You can add the CDL Tank endorsement to your existing CDL license. To do so, you will need to pass the Tanker Vehicles endorsement knowledge test and any other applicable knowledge or skills tests required for the type of Tank endorsement you need (N or H).

You can add the Tank endorsement to your CDL license at any time by visiting a Connecticut DMV office and completing the necessary application and testing. You will also need to pay a fee for the endorsement.

It is important to note that adding the Tank endorsement to your CDL license may require additional training, as well as a background check and fingerprinting for the H endorsement. You should also be aware that some employers may require their drivers to have a Tank endorsement in order to operate certain types of vehicles or transport certain types of materials.

If you are unsure about whether you need the Tank endorsement or how to add it to your CDL license, you should contact your local DMV office or consult with a qualified CDL training provider.

Yes, there are specific requirements and regulations for handling hazardous materials with a CDL Tank endorsement. The Federal Motor Carrier Safety Administration (FMCSA) has established regulations for the transportation of hazardous materials, which apply to drivers who transport these materials in tanker vehicles.

Here are some of the key requirements and regulations:

1. Endorsement: In addition to the Tank endorsement, drivers who transport hazardous materials must have a Hazardous Materials (H) endorsement on their CDL.

2. Training: Drivers who transport hazardous materials must complete specialized training that covers the safe handling and transportation of hazardous materials. This training must be completed before the driver can transport hazardous materials.

3. Placards: Tanker vehicles transporting hazardous materials must display the appropriate placards that indicate the type of hazardous material being transported.

4. Route planning: Drivers must plan their routes carefully to avoid areas where hazardous materials are not permitted or where there may be a high risk of accidents or incidents.

5. Emergency response: Drivers who transport hazardous materials must be prepared to respond to emergencies, including spills and leaks. They must carry emergency response information and have appropriate personal protective equipment (PPE) available.

6. Inspection and maintenance: Tanker vehicles used to transport hazardous materials must be inspected and maintained regularly to ensure they are in good condition and safe for use.

It is important for drivers who transport hazardous materials with a CDL Tank endorsement to be familiar with these requirements and regulations, as well as any additional state or local regulations that may apply.
DMV Writen Test